(b)
 Other damage (cracks, scratches, stress, marks, dents, bumps...):

 -If you find this type of damage, refer to the Structural Repair Manual (Ref. SRM 511100 PB 001) for damage classification and corrective action.
R 1EFF : ALL 1 57-10-00Page 676 1 1 May 01/05 1 1 1CES 1

 5. Close-up
________

 Subtask 57-10-00-370-050
 A. Not Applicable
 Subtask 57-10-00-390-050

 B. Application of Sealant R (Ref. Fig. 616/TASK 57-10-00-991-023)
 (1)
 Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003).

 (2)
 Apply sealant on the fasteners (1) of the inspection areas (Ref. SRM 517612,P.Block-001) and (Ref. TASK 51-76-12-300-002).

 Subtask 57-10-00-410-079
 C. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Install the access covers 147AZ, 148AZ (Ref. TASK 57-17-11-400-001).

 (3)
 Remove the access platform(s).

 (4)
 Close the main landing-gear doors (Ref. TASK 32-12-00-410-001).

R 1EFF : ALL 1 57-10-00Page 677 1 1 May 01/05 1 1 1CES 1 TASK 57-10-00-200-024

 Special Detailed Inspection of Outer WB, Upper Surface of Triform Fitting (on First Row of Fasteners from RIB1), between Stringer 8 and FR42, LH/RH
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 571182-01
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific flashlight
 No specific warning notices
 No specific access platform 2 m (6 ft. 7 in.)
 98D27803500001 1 TOOL-ZERO LOCKING, FLAP SLAT CTL LEVER
 98D57004013000 2 HOOK-COVER (RIB 2 SURGE DOORS)
 98D57004014000 2 HOOK-COVER (RIB2-SURGE DOORS)

 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004  USA MIL-T-81533 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00)
 Material No. 19-003  USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
 1EFF : ALL 1 57-10-00Page 678 1 1 May 01/05R 1 1 1CES 1

 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
28-00-00-910-001 Fuel Safety Procedures 28-10-00-910-001 Safety Procedures When You Do Work in a Fuel Tank 28-10-00-910-002 Access to the Fuel Tanks and the Work Areas 51-76-12-300-002 Repair of the Fuel Tank Fillet 57-27-11-000-001 Removal of the Access Panel (540AB, 540BB, 540CB,
 540DB, 540EB, 540FB, 540GB, 640AB, 640BB, 640CB, 640DB, 640EB, 640FB, 640GB)
 57-27-11-400-001  Installation of the Access Panel (540AB, 540BB, 540CB, 540DB, 540EB, 540FB, 540GB, 640AB, 640BB, 640CB, 640DB, 640EB, 640FB, 640GB)
 NTM 571182,P.Block-401
 SRM 517612,P.Block-001
 SRM 511100,P.Block 001 (for corrective action)
 SRM 512200,P.Block 001 (for corrective action)

R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
 57-10-00-991-024  Fig. 617
 **ON A/C 301-399,
 57-10-00-991-024-A  Fig. 617A
 **ON A/C ALL
 3. Job Set-up
__________
 Subtask 57-10-00-941-066
 A. Safety Precautions
 WARNING : OBEY THE FUEL SAFETY PROCEDURES.
_______
 (1)
 Obey the fuel safety precautions (Ref. TASK 28-00-00-910-001) and (Ref. TASK 28-10-00-910-001).

 (2)
 Install the TOOL-ZERO LOCKING, FLAP SLAT CTL LEVER (98D27803500001) on the flap/slat control lever.

 (3)
 Install warning notices in the cockpit to tell persons not to operate the flaps or slats.

 Subtask 57-10-00-010-079
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINGS 機翼1(59)