(2)
 Apply a layer of STORAGE PRESERVATION (Material No. 15-005) or STORAGE PRESERVATION (Material No. 15-006) to the inspection area.

 (3)
 Apply a layer of STORAGE PRESERVATION (Material No. 15-008) or STORAGE PRESERVATION (Material No. 15-007) to the inspection area.

 (4)
 Remove the masking paper or the masking tape.

 1EFF : ALL 1 57-10-00Page 623 1 1 Nov 01/04R 1 1 1CES 1

 Center Wing Box - Rear Spar - Aft Face Figure 605/TASK 57-10-00-991-010
 1EFF : 1 1R 1CES  ALL  1 11 1 57-10-00 Page 624 Nov 01/04

 5. Close-up
________

 Subtask 57-10-00-410-069
 A. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Remove the access platform(s).

 (3)
 Close the main landing-gear doors (Ref. TASK 32-12-00-410-001).

 1EFF : ALL 1 57-10-00Page 625 1 1 Nov 01/04R 1 1 1CES 1

 TASK 57-10-00-200-013

 Detailed Inspection of Center Wing Box, Bottom Skin Lower Surface, from Stringer 11 to Stringer 15, between Y=+/-1292, as far as visible
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 571134-01
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific flashlight
 No specific access platform 2 m (6 ft. 7 in.)

 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004  USA MIL-T-81533 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00)
 Material No. 19-003  USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
32-12-00-010-001 Open the Main Gear Doors for Access 32-12-00-410-001 Close the Main Gear Doors after Access 53-35-11-000-001 Removal of the Wing-to-Fuselage Fairings 53-35-11-400-001 Installation of the Wing-to-Fuselage Fairings 53-35-13-000-002 Removal of the Quick-Release Access Panels from the
 Belly Fairing Structure 53-35-13-400-002 Installation of the Quick-Release Access Panels on the Belly Fairing Structure 57-17-11-000-001 Removal of the Covers 147AZ (148AZ)
 1EFF : ALL 1 57-10-00Page 626 1 1 Nov 01/04R 1 1 1CES 1

 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
57-17-11-400-001 Installation of the Covers 147AZ (148AZ) SRM 511100-P.Block001 SRM 512200-P.Block001 57-10-00-991-011 Fig. 606
 3. Job Set-up
__________
 Subtask 57-10-00-010-072
 A. Get Access
 (1)
 Open the main landing-gear doors (Ref. TASK 32-12-00-010-001).

 (2)
 Put an access platform in position at the zone 147 (148).

 (3)
 Remove the access covers 147AZ, 148AZ (Ref. TASK 57-17-11-000-001).

 (4)
 Remove the access panels.
 191CT, 192CT, 191LB
 192LB
 (Ref. TASK 53-35-11-000-001)
 191BB, 191EB, 191KB
 192EB, 192FB, 192KB
 195AB, 196AB (Ref. TASK 53-35-13-000-002).

 (5)
 Use a flashlight for the inspection.

 Subtask 57-10-00-110-051
 B. Cleaning of the Structure
 WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
 1EFF : ALL 1 57-10-00Page 627 1 1 Nov 01/04R 1 1 1CES 1

 WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE
_______ MATERIAL/S. USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.
 (1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if necessary.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINGS 機翼1(46)