曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

(d) Duties and responsibilities
(This paragraph should further develop the duties and responsibilities of:
.  the personnel listed in paragraphs c): “Continuing airworthiness coordination ",
.  the quality manager, as regards the quality monitoring of the maintenance system [which includes the approved maintenance organisation(s)]
(e) Manpower resources and training policy
1.  Manpower resources
(This paragraph should give broad figures to show that the number of people dedicated to the performance of the approved continuing airworthiness activity is adequate. It is not necessary to give the detailed number of employees of the whole company but only the number of those involved in continuing airworthiness. This could be presented as follows :)
As of 28 November 2003, the number of employees dedicated to the performance of the continuing airworthiness management system is the following:
Full Time  Part Time in equivalent full time 
Quality monitoring   AA  aa = AA’ 
Continuing airworthiness management   BB  bb = BB’ 
(Detailed information about the  BB1  bb1 = BB1’ 
management group of persons)  BB2  bb2 = BB2’ 
Other...  CC  cc =CC’ 
Total  TT  tt = TT’ 
Total Man hours  TT + TT’ 

(Note: According to the size and complexity of the organisation, this table may be further developed or simplified)
Maldivian Civil Aviation Regulations MCAR M – Continuing Airworthiness Civil Aviation Department Section 2 – Acceptable Means of Compliance
2. Training policy
(This paragraph should show that the training and qualification standards for the personnel quoted above are consistent with the size and complexity of the organisation. It should also explain how the need for recurrent training is assessed and how the training recording and follow-up is performed
0.4 Management organisation charts
(a) General organisation chart Continuing airworthiness management organisation chart

This flow chart should give further details on the continuing  airworthiness Management system, and should  clearly show the independence  of the qualitymonitoring system, including the links between the quality assurance department and the other departments (see example below). This flow chart may be combined with the one above or subdivided as necessary, depending on the size and the complexity of the organisation. For example in the case of an AOC holder:

0.5 Notification procedure to CAD regarding changes to the organisation's activities / approval / location / personnel
(This paragraph should explain in which occasion  the company should inform the CAD prior to incorporating proposed changes; for instance:
The accountable manager (or any delegated person such as the engineering director or the quality manager) will notify to CAD any change concerning:
1.  
the company's name and location(s)

2.  
the group of person as specified in paragraph 0.3.c)

3.  
operations, procedures and technical arrangements, as far as they may affect the approval.

Joe Bloggs will not incorporate such change until the change have been assessed and approved by CAD.)
0.6 Exposition amendment procedure
(This paragraph should explain who is responsible for the amendment of the exposition and submission to CAD for approval. This may include, if agreed by CAD the possibility for the approved organisation to approve internally minor changes that have no impact on the approval held. The paragraph should then specify what types of changes are considered as minor and major and what the approval procedures for both cases are.)
PART 1 CONTINUING AIRWORTHINESS MANAGEMENT PROCEDURES
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：馬爾代夫民航法規 MCAR-M Continuing Airworthiness(106)