曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

(See PRECISION APPROACH PROCEDURE.)
PRECISION APPROACH PROCEDURE- A standard
instrument approach procedure in which an
electronic glideslope/glidepath is provided; e.g., ILS,
MLS, and PAR.
(See INSTRUMENT LANDING SYSTEM.)
(See MICROWAVE LANDING SYSTEM.)
(See PRECISION APPROACH RADAR.)
PRECISION APPROACH RADAR- Radar equipment
in some ATC facilities operated by the FAA
and/or the military services at joint‐use civil/military
locations and separate military installations to detect
and display azimuth, elevation, and range of aircraft
on the final approach course to a runway. This
equipment may be used to monitor certain nonradar
approaches, but is primarily used to conduct a
precision instrument approach (PAR) wherein the
controller issues guidance instructions to the pilot
based on the aircraft's position in relation to the final
approach course (azimuth), the glidepath (elevation),
2/14/08 Pilot/Controller Glossary
PCG P-3
and the distance (range) from the touchdown point on
the runway as displayed on the radar scope.
Note:The abbreviation “PAR” is also used to
denote preferential arrival routes in ARTCC
computers.
(See GLIDEPATH.)
(See PAR.)
(See PREFERENTIAL ROUTES.)
(See ICAO term PRECISION APPROACH
RADAR.)
(Refer to AIM.)
PRECISION APPROACH RADAR [ICAO]- Primary
radar equipment used to determine the position
of an aircraft during final approach, in terms of lateral
and vertical deviations relative to a nominal approach
path, and in range relative to touchdown.
Note:Precision approach radars are designed to
enable pilots of aircraft to be given guidance by
radio communication during the final stages of the
approach to land.
PRECISION OBSTACLE FREE ZONE (POFZ)-
An 800 foot wide by 200 foot long area centered on
the runway centerline adjacent to the threshold
designed to protect aircraft flying precision
approaches from ground vehicles and other aircraft
when ceiling is less than 250 feet or visibility is less
than 3/4 statute mile (or runway visual range below
4,000 feet.)
PRECISION RUNWAY MONITOR (PRM)- Provides
air traffic controllers with high precision
secondary surveillance data for aircraft on final
approach to parallel runways that have extended
centerlines separated by less than 4,300 feet. High
resolution color monitoring displays (FMA) are
required to present surveillance track data to
controllers along with detailed maps depicting
approaches and no transgression zone.
PREFERENTIAL ROUTES- Preferential routes
(PDRs, PARs, and PDARs) are adapted in ARTCC
computers to accomplish inter/intrafacility controller
coordination and to assure that flight data is posted at
the proper control positions. Locations having a need
for these specific inbound and outbound routes
normally publish such routes in local facility
bulletins, and their use by pilots minimizes flight
plan route amendments. When the workload or traffic
situation permits, controllers normally provide radar
vectors or assign requested routes to minimize
circuitous routing. Preferential routes are usually
confined to one ARTCC's area and are referred to by
the following names or acronyms:
a. Preferential Departure Route (PDR). A specific
departure route from an airport or terminal area to an
en route point where there is no further need for flow
control. It may be included in an Instrument
Departure Procedure (DP) or a Preferred IFR Route.
b. Preferential Arrival Route (PAR). A specific
arrival route from an appropriate en route point to an
airport or terminal area. It may be included in a
Standard Terminal Arrival (STAR) or a Preferred IFR
Route. The abbreviation “PAR” is used primarily
within the ARTCC and should not be confused with
the abbreviation for Precision Approach Radar.
c. Preferential Departure and Arrival Route
(PDAR). A route between two terminals which are
within or immediately adjacent to one ARTCC's area.
PDARs are not synonymous with Preferred IFR
Routes but may be listed as such as they do
accomplish essentially the same purpose.
(See PREFERRED IFR ROUTES.)
PREFERRED IFR ROUTES- Routes established
between busier airports to increase system efficiency
and capacity. They normally extend through one or
more ARTCC areas and are designed to achieve
balanced traffic flows among high density terminals.
IFR clearances are issued on the basis of these routes
except when severe weather avoidance procedures or
other factors dictate otherwise. Preferred IFR Routes
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：Air Traffic Control空中交通管制2(138)