曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

SUBTASK 27-32-42-020-003
(5) Cover the electrical connectors of the shelf with plastic caps.
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-32-42
Page 402
Jun 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Stall Management Yaw Damper Installation
Figure 401 (Sheet 1 of 2)/27-32-42-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-32-42
Page 403
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Stall Management Yaw Damper Installation
Figure 401 (Sheet 2 of 2)/27-32-42-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-32-42
Page 404
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-32-42-400-801
3. Stall Management Yaw Damper (SMYD) Installation
(Figure 401)
A. References
Reference Title
20-10-07-400-801 E/E Box Installation (P/B 201)
20-40-12-400-802 ESDS Handling for Metal Encased Unit Installation (P/B 201)
20-40-12-400-803 Conductive Dust Cap and Conductor Cover Removal (P/B 201)
22-11-00-740-806 BITE Library Test (P/B 501)
24-22-00-860-813 Supply External Power (P/B 201)
27-32-00-740-803 Stall Management Yaw Damper (SMYD) BITE Test - Ground Test
(P/B 501)
34-21-03-400-801 IRS Mode Select Unit Installation (P/B 401)
B. Expendables/Parts
AMM Item Description AIPC Reference AIPC Effectivity
1 SYMD 27-32-42-02-005 GUN 155
C. Location Zones
Zone Area
118 Electrical and Electronics Compartment - Right
D. Access Panels
Number Name/Location
117A Electronic Equipment Access Door
E. Prepare for the Installation
SUBTASK 27-32-42-860-003
(1) If you will install the number 1 SMYD, do this step:
Make sure that these circuit breakers are open and have safety tags:
CAPT Electrical System Panel, P18-2
Row Col Number Name
E 4 C01392 STICK SHAKER LEFT
E 5 C01204 SMYD-1 CMPTR DC
E 6 C01205 SMYD-1 SNSR EXC AC
SUBTASK 27-32-42-860-004
(2) If you will install the number 2 SMYD, do this step:
Make sure that these circuit breakers are open and have safety tags:
F/O Electrical System Panel, P6-1
Row Col Number Name
B 4 C01207 SMYD-2 SNSR EXC AC
B 5 C01206 SMYD-2 CMPTR DC
B 6 C01393 STICK SHAKER RIGHT
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-32-42
Page 405
Jun 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
F. SMYD Installation
SUBTASK 27-32-42-910-002
CAUTION: DO NOT TOUCH THE SMYD BEFORE YOU DO THE PROCEDURE FOR DEVICES THAT
ARE SENSITIVE TO ELECTROSTATIC DISCHARGE. ELECTROSTATIC DISCHARGE
CAN CAUSE DAMAGE TO THE SMYD.
(1) Do the necessary steps to protect the SMYD from electrostatic discharge. To do this, do this task:
ESDS Handling for Metal Encased Unit Installation, TASK 20-40-12-400-802.
SUBTASK 27-32-42-210-001
(2) Make sure the SMYD and shelf connectors are clean.
SUBTASK 27-32-42-020-004
(3) Remove any protective caps or bags from SMYD and shelf. To do this, do this task: Conductive
Dust Cap and Conductor Cover Removal, TASK 20-40-12-400-803.
SUBTASK 27-32-42-420-002
CAUTION: ELECTRICAL PINS ON THE SMYD CONNECTOR AND TRAY CONNECTOR MUST NOT
BE BENT OR DAMAGED. INSTALLATION OF A SMYD BOX WITH DAMAGED PINS
COULD RESULT IN DAMAGE TO THE SMYD, TRAY ELECTRICAL CONNECTOR, OR
SYSTEM COMPONENTS.
(4) Slide the SYMD [1] into the shelf.
NOTE: Refer to (E/E Box Installation, TASK 20-10-07-400-801) for further details on the E/E
box installation.
SUBTASK 27-32-42-820-001
(5) Tighten the hold down knob.
G. Stall Management Yaw Damper Module Installation Test
SUBTASK 27-32-42-860-005
(1) Supply electrical power to the airplane. To do this, do this task: Supply External Power,
TASK 24-22-00-860-813.
(a) Make sure the IRU is operating. do this task: IRS Mode Select Unit Installation,
TASK 34-21-03-400-801
(b) Make sure the FMC is powered and has good weight data entered. do this task: BITE
Library Test, TASK 22-11-00-740-806
SUBTASK 27-32-42-860-006
(2) For the applicable SMYD, do this step:
Remove the safety tags and close these circuit breakers:
CAPT Electrical System Panel, P18-2
Row Col Number Name
E 4 C01392 STICK SHAKER LEFT
E 5 C01204 SMYD-1 CMPTR DC
E 6 C01205 SMYD-1 SNSR EXC AC
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 AIRCRAFT MAINTENANCE MANUAL飛機維護手冊3(105)