曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

tools shown are alternates to each other within the same airplane series. Tool part numbers
that are replaced or non-procurable are preceded by "Opt:", which stands for Optional.
Reference Description
SPL-1585 Kit - Rigging Pins, All Systems
(Part #: F70207-109, Supplier: 81205, A/P Effectivity: 737-600, -700,
-700C, -700ER, -700QC, -800, -900, -900ER, -BBJ)
SPL-1747 Set - Support, Forward Elevator Control Quadrant
(Part #: C27036-1, Supplier: 81205, A/P Effectivity: 737-600, -700,
-700C, -700ER, -700QC, -800, -900, -900ER, -BBJ)
C. Location Zones
Zone Area
112 Area Forward of Nose Landing Gear Wheel Well
211 Flight Compartment - Left
212 Flight Compartment - Right
318 Tail Cone Compartment - Right
D. Access Panels
Number Name/Location
112A Forward Access Door
318BR Tailcone Access Door
E. Prepare for the Removal
SUBTASK 27-31-54-860-001
(1) Do this task: Remove Pressure from the Elevator Hydraulic Systems A and B,
TASK 27-31-00-800-802.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-31-54
Page 401
Oct 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SUBTASK 27-31-54-010-001
(2) To get access to the elevator forward quadrant, do thsi task:
Open this access panel:
Number Name/Location
112A Forward Access Door
SUBTASK 27-31-54-010-002
(3) To get access to the elevator aft quadrant, do this task:
Remove this access panel:
Number Name/Location
318BR Tailcone Access Door
SUBTASK 27-31-54-480-001
(4) Install the rig pin E-5 from the rig pin kit, SPL-1585 in the elevator aft quadrant (Figure 401).
SUBTASK 27-31-54-480-002
(5) Install the rig pin E-1 from the rig pin kit, SPL-1585 in the left forward quadrant (Figure 402).
SUBTASK 27-31-54-020-001
(6) Remove the applicable control column. To remove it, do this task: Control Column - Removal,
TASK 27-31-51-000-801.
F. Support Bearing Removal
(Figure 402)
SUBTASK 27-31-54-020-002
(1) Turn the cable turnbuckles [1] to release the tension in the elevator control cables.
NOTE: Do not disconnect the cable turnbuckles.
SUBTASK 27-31-54-480-003
CAUTION: MAKE SURE YOU INSTALL A SUPPORT FOR THE FORWARD QUADRANT ASSEMBLY
BEFORE AND AFTER YOU REMOVE THE COUPLINGS. IF YOU DO NOT HOLD THE
FORWARD QUADRANT ASSEMBLY CORRECTLY, YOU CAN CAUSE DAMAGE TO
EQUIPMENT.
(2) Install the set, SPL-1747 to support the forward quadrant assembly.
SUBTASK 27-31-54-020-003
(3) Remove the nuts [5], washers [4], and bolts [3] from the inboard couplings [6].
SUBTASK 27-31-54-020-004
(4) Remove the forward quadrant connector [11].
SUBTASK 27-31-54-020-005
(5) Remove the bearing housing [15]:
(a) Remove the nuts [7], washers [9], upper bolts [10] from the bearing housing [15].
(b) Remove the nuts [17], washers [16], washers [14], and lower bolts [13] from the bearing
housing [15].
(c) Remove the bearing housing [15] and shim [8] from the airplane.
SUBTASK 27-31-54-020-006
(6) Remove the bearing [12] from the bearing housing [15]:
(a) Turn the bearing [12] at the right angles to the bearing housing [15].
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-31-54
Page 402
Oct 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(b) Align the bearing [12] with the slots in the bearing housing [15].
(c) Remove the bearing [12] from the bearing housing [15].
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-31-54
Page 403
Jun 10/2004
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Elevator Rig Pin Installation
Figure 401/27-31-54-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-31-54
Page 404
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Control Column Support Bearing Installation
Figure 402 (Sheet 1 of 5)/27-31-54-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-31-54
Page 405
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Control Column Support Bearing Installation
Figure 402 (Sheet 2 of 5)/27-31-54-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-31-54
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 AIRCRAFT MAINTENANCE MANUAL飛機維護手冊3(74)