曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

SPL-1585 Kit - Rigging Pins, All Systems
(Part #: F70207-109, Supplier: 81205, A/P Effectivity: 737-600, -700,
-700C, -700ER, -700QC, -800, -900, -900ER, -BBJ)
C. Location Zones
Zone Area
317 Tail Cone Compartment - Left
318 Tail Cone Compartment - Right
D. Access Panels
Number Name/Location
318BR Tailcone Access Door
E. Prepare for the Removal
SUBTASK 27-31-67-860-001
(1) Do this task: Remove Pressure from the Elevator Hydraulic Systems A and B,
TASK 27-31-00-800-802.
SUBTASK 27-31-67-010-001
(2) Remove this access panel:
Number Name/Location
318BR Tailcone Access Door
SUBTASK 27-31-67-480-001
(3) Install the rig pin E-5 from the rig pin kit, SPL-1585 in the elevator aft control quadrant
(Figure 401).
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-31-67
Page 401
Oct 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
F. Elevator Feel Actuator Removal
SUBTASK 27-31-67-020-001
WARNING: RELEASE THE CONNECTION SLOWLY AND LET THE PRESSURE DECREASE BEFORE
YOU COMPLETELY REMOVE THE HYDRAULIC LINE. IF YOU DISCONNECT THE
HYDRAULIC LINE WHEN IT HAS PRESSURE, A SPRAY OF HYDRAULIC FLUID CAN
CAUSE INJURY TO PERSONS.
(1) Disconnect the hydraulic lines from the Elevator Feel Actuator [3] Figure 401.
(a) Install the caps and plugs on the open ports and hydraulic lines. Discard the packings [11]
and the packings [15].
SUBTASK 27-31-67-020-002
(2) Remove the Elevator Feel Actuator [3] from the elevator feel and centering unit [1]:
(a) Remove nut [20], washer [21], nut [22], washer [23], and bolt assembly [24] from the aft
connection of the Elevator Feel Actuator [3].
(b) Remove the nut [17], washer [18], bushing [19], and slide block [16] from the anti-rotation
fitting [6].
(c) Remove the nut [10], washer [9], nut [8], washer [7], spacer [5], anti-rotation fitting [6], and
bolt assembly [4] from the forward connection of the Elevator Feel Actuator [3].
(d) Remove the Elevator Feel Actuator [3].
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-31-67
Page 402
Feb 10/2004
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Elevator Feel Actuator Installation
Figure 401 (Sheet 1 of 2)/27-31-67-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-31-67
Page 403
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Elevator Feel Actuator Installation
Figure 401 (Sheet 2 of 2)/27-31-67-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-31-67
Page 404
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-31-67-400-801
3. Elevator Feel Actuator Installation
(Figure 401)
A. References
Reference Title
27-31-00-700-812 Feel Force System - Test (P/B 501)
27-31-00-840-802 Put the Elevator Systems A and B Back to the Condition Before the
Pressure Removal (P/B 201)
B. Tools/Equipment
NOTE: When more than one tool part number is listed under the same "Reference" number, the
tools shown are alternates to each other within the same airplane series. Tool part numbers
that are replaced or non-procurable are preceded by "Opt:", which stands for Optional.
Reference Description
SPL-1585 Kit - Rigging Pins, All Systems
(Part #: F70207-109, Supplier: 81205, A/P Effectivity: 737-600, -700,
-700C, -700ER, -700QC, -800, -900, -900ER, -BBJ)
C. Consumable Materials
Reference Description Specification
D00153 Fluid - Hydraulic, Erosion Arresting, Fire Resistant BMS3-11, Type
IV
(interchange~
able&
intermixable
with Type V)
D. Location Zones
Zone Area
317 Tail Cone Compartment - Left
318 Tail Cone Compartment - Right
E. Access Panels
Number Name/Location
318BR Tailcone Access Door
F. Elevator Feel Actuator Installation
SUBTASK 27-31-67-420-001
(1) If it is necessary, do these steps to install the new packings, unions, and reducer:
(a) Lubricate the new packings, unions, and reducer with fluid, D00153.
(b) Install the new packings [11], new packings [15], unions [12], union [14], and reducer [13] to
the Elevator Feel Actuator [3].
SUBTASK 27-31-67-420-002
(2) Install the Elevator Feel Actuator [3]:
(a) Put and hold the Elevator Feel Actuator [3] in its position.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 AIRCRAFT MAINTENANCE MANUAL飛機維護手冊3(83)