曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

thrust brace [39] to help make the installation easier. Do not use sharp objects to
make marks.
(b) Remove the pin [44], nut [43], washer [42], washer [41], and bolt [40].
SUBTASK 27-41-31-020-003
(3) Remove the thrust brace fitting [51] from the hinge fitting [24]:
(a) Remove the nuts [50], washers [49], washers [48], and bolts [47] that attach the thrust brace
fitting [51] to the hinge fitting [24].
NOTE: Use a marker or pen to make marks on the thrust brace fitting [51] to help make
the installation easier. Do not use sharp objects to make marks.
(b) Remove the thrust brace fitting [51] and shim [46].
SUBTASK 27-41-31-020-004
(4) Remove the fail safe link [10] from the hinge fitting [24]:
(a) Remove the nuts [7], washers [5], washers [6], bolt [4], and bolt [9].
(b) Remove the bonding jumper [8].
(c) Remove the pin [56], nut [15], washer [14], washer [13], and bolt [12]. Discard the pin [56].
(d) Remove the fail safe link [10] and filler [11].
SUBTASK 27-41-31-020-005
(5) Remove the hinge fitting [24]:
(a) Remove the bolts [52] from the bracket [53].
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-41-31
Page 403
Jun 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(b) Remove the bolts [54] from the bracket [55].
(c) Remove the pin [33], nut [32], washer [31], washer [30], and bolt [29] from the hinge fitting
[24]. Discard the pin [33].
(d) Remove the pin [45], nut [44], washer [43], washer [42], and bolt [41] from the hinge fitting
[24]. Discard the pin [45].
(e) Remove the hinge fitting [24] from the airplane.
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-41-31
Page 404
Jun 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Stabilizer Trim Lock Installation
Figure 401/27-41-31-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-41-31
Page 405
Jun 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Horizontal Stabilizer Center Section Hinge Fitting Installation
Figure 402 (Sheet 1 of 5)/27-41-31-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-41-31
Page 406
Jun 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Horizontal Stabilizer Center Section Hinge Fitting Installation
Figure 402 (Sheet 2 of 5)/27-41-31-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-41-31
Page 407
Jun 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Horizontal Stabilizer Center Section Hinge Fitting Installation
Figure 402 (Sheet 3 of 5)/27-41-31-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-41-31
Page 408
Jun 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Horizontal Stabilizer Center Section Hinge Fitting Installation
Figure 402 (Sheet 4 of 5)/27-41-31-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-41-31
Page 409
Jun 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Horizontal Stabilizer Center Section Hinge Fitting Installation
Figure 402 (Sheet 5 of 5)/27-41-31-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-41-31
Page 410
Jun 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-41-31-400-801
3. Horizontal Stabilizer Center Section Hinge Fitting Installation
(Figure 401, Figure 402)
A. Tools/Equipment
NOTE: When more than one tool part number is listed under the same "Reference" number, the
tools shown are alternates to each other within the same airplane series. Tool part numbers
that are replaced or non-procurable are preceded by "Opt:", which stands for Optional.
Reference Description
COM-1550 Meter - Bonding
(Part #: C15292, Supplier: 01014, A/P Effectivity: 737-ALL)
(Part #: M1, Supplier: 3AD17, A/P Effectivity: 737-ALL)
(Part #: M1B, Supplier: 3AD17, A/P Effectivity: 737-ALL)
(Part #: MODEL 1010-A, Supplier: 3AD17, A/P Effectivity: 737-ALL)
SPL-1672 Assembly - Lock, Stabilizer Trim
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 AIRCRAFT MAINTENANCE MANUAL飛機維護手冊3(133)