(3)
IPC 27-51-24, Fig. 1
B.
Access
(1)
Location Zone 563 Outboard Flap Track Fairing, Inboard Flap, LH (Track No. 3) 561 Inboard Flap Track Fairing, Inboard Flap, LH (Track No. 4) 661 Inboard Flap Track Fairing, Inboard Flap, RH (Track No. 5)
663 Outboard Flap Track Fairing, Inboard Flap, RH (Track No. 6)
C. Procedure
S 864-002
(1) Pressurize hydraulic systems No. 1 and 4 (Ref 29-11-00/201).
S 864-009
WARNING: MAKE SURE THAT PERSONS AND EQUIPMENT ARE CLEAR OF THE LE AND TE
_______ FLAPS AND FLAP DRIVE MECHANISMS BEFORE YOU MOVE THE FLAP CONTROL LEVER. WITH HYDRAULIC POWER REMOVED, THE FLAPS WILL MOVE AUTOMATICALLY BY ELECTRICAL POWER WHEN YOU MOVE THE FLAP CONTROL LEVER.
(2) Put the flap control lever in the 30-unit detent to extend the flaps.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-24
ALL ú ú 01 Page 401 ú Jun 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
S 864-004
(3)
Release the pressure in hydraulic systems No. 1 and 4 (Ref 29-11-00/201).
S 494-005
(4)
Install supports on the foreflap to make sure that the bolt which attaches the foreflap and toggle can be removed.
S 034-006
(5)
Disconnect the carriage and toggle from the inboard foreflap (Ref 27-51-02/401).
S 024-007
(6)
Remove the carriage and toggle (Fig. 401):
(a)
Remove the bolts from the links which hold the forward side of the foreflap cam tracks.
(b)
Remove the bolts, washers and the nuts which connect the flight rollers to the foreflap carriage and toggle.
(c)
Remove the flight rollers.
(d)
Remove the bolts, washers, shims and the nuts which connect the failsafe link, aft deadweight rollers, and the guide strips to each side of the carriage and toggle.
(e)
Remove the failsafe links, rollers, and the guide strips.
(f)
Lift the carriage from the flap track.
(g)
Reinstall the flight rollers, the deadweight rollers, the failsafe link, and the guide strips on the carriage.
TASK 27-51-24-404-008
3. Inboard Foreflap Carriage and Toggle Installation_________________________________________________
A. Consumable Materials
(1)
D00633 Grease - BMS 3-33 (recommended)
(2)
D00013 Grease - MIL-G-23827 (alternative)
B.
References
(1)
27-51-02/401, Inboard Foreflap
(2)
29-11-00/201, Main Hydraulic Supply System
(3)
IPC 27-51-24, Fig. 1
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-24
ALL ú ú 01 Page 402 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
SEE B
SEE A AFTCARRIAGE
DEADWEIGHT SHIM ROLLER
A
NUT
BOLT
FOREFLAP CARRIAGE BOLT
AND TOGGLE
GUIDE STRIP
FAILSAFE LINK
A A-A
NUT AFLIGHT ROLLER
FLAP
TRACK
FAILSAFE
WASHER LINK
BOLTFLIGHT
(2 LOCATIONS)
ROLLER
(2 LOCATIONS)
AFT
B
Inboard Foreflap Carriage and Toggle Installation
Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-24
ALL ú ú 01 Page 403 ú Oct 10/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
C. Access
(1) Location Zone
563 Outboard Flap Track Fairing, Inboard Flap, LH
(Track No. 3)
561 Inboard Flap Track Fairing, Inboard Flap, LH
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機(jī)維護(hù)手冊 飛行操縱 FLIGHT CONTROLS 5(10)
