(b)
If you will disconnect the movable fairing at the flap track and fixed drive link, do the following (Fig. 401, View B). 1) Put padding inside the movable fairing to protect the
linkage assembly and fairing skin from scratches and abrasions. 2) Remove the bolt that attaches the drive rod to the midflap fitting. 3) Disconnect the fixed drive link from the flap track (View D-D). 4) Remove the bolt (32), nut (33) and washers (34) that hold the link pivot pin (31) in place.
CAUTION: WHEN YOU REMOVE THE LINK PIVOT PIN, THE FLAP DRIVE
_______ LINK WILL SEPARATE FROM THE FLAP TRACK. BE PREPARED TO LOWER THE LINKAGE ASSEMBLY ONTO THE PADDING IN THE MOVABLE FAIRING. IF YOU DO NOT SUPPORT THE LINKAGE ASSEMBLY, DAMAGE TO HARDWARE COULD OCCUR.
5) Remove the link pivot pin (31) from the joint.
(c)
If you will disconnect the movable fairing at the fairing fitting and the support fitting, remove two bolts (29 and 30) which attach the support fitting to the fairing.
NOTE:____Make sure that the fairing is correctly held. The fairing weighs approximately 110 pounds (50 kilograms).
(d)
Remove two bolts (19 and 20) which attach the fairing to the hinge.
CAUTION:_______BE CAREFUL WITH THE FAIRING DURING THE REMOVAL. THE FAIRING SURFACE IS EASILY DAMAGED.
(e)
Lower the fairing from the airplane.
NOTE: The fairing will turn easily in the handling dolly.
____ Use the guide ropes to make sure that the fairing does not turn in the handling dolly.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-26
ALL ú ú 01 Page 409 ú Oct 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
S 034-011
(7)
Remove the hinge (if a replacement is necessary).
(a)
Remove the tiebolt (9) and two adjustable rods (6).
(b)
Remove the hinge bolt (26), hinge link (10) and hinge fitting (11).
TASK 27-51-26-404-012
3. Inboard Flap Track Fairing Installation_______________________________________
A. Special Tools and Equipment
(1)
PF51-009-1 Fishpole Hoist, Pneumatic Powered (2 are necessary) (Preferred).
(2)
PF51-003-1 Fishpole Hoist, Manual (Optional to PF51-009)
(3)
PME65B00110-53 Flap Track Fairing Handling Dolly
(4)
OHME65B00110-53 Flap Track Fairing Bootstrap Clamp
B.
Consumable Materials
(1)
C00259 Enamel - Primer, Green, BMS 10-11
(2)
D00633 Grease - BMS 3-33 (recommended)
(3)
D00013 Grease - MIL-G-23827 (alternative)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-26
ALL ú ú 01 Page 410 ú Feb 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
C. Parts ~.............................................................................. | AMM | | AIPC | ................. ............................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ................................................................................ | 401 | 1 | Fairing Assy - (No. 3) Movable | 27-51-26| 01 | 160 | | | | Fairing | | | | | | | Fairing Assy - (No. 4) Movable | 27-51-11| 02 | 155 | | | | Fairing | | | | | | | Fairing Assy - (No. 5) Movable | | | 160 | | | | Fairing | | | | | | | Fairing Assy - (No. 6) Movable | 27-51-26| 01 | 165 | | | | Fairing | | | | | | 2 | Snubber Block | | 03 | 300 | | | 3 | Shim | | | 305 | | | | Shim | | | 310 | | | 4 | Nut (Fairing No. 3 and 6) | 27-51-42| 02 | 70 | | | | Nut (Fairing No. 4 and 5) | | | 455 | | | 5 | Washer (Fairing No. 3 and 6) | | | 90 | | | | Washer (Fairing No. 4 and 5) | | | 453 | | | 6 | Rod Assy (Fairing No. 3 and 6) | | | 75 | | | | Rod Assy (Fairing No. 4 and 5) | | | 406J | | | 7 | Washer (Fairing No. 3 and 6) | | | 60 | | | | Washer (Fairing No. 4 and 5) | | | 450 | | | 8 | Lock - Tiebolt (Fairing No. 3 | | | 20 | | | | and 6) | | | | | | | Lock - Tiebolt (Fairing No. 4 | | | 410 | | | | and 5) | | | | | | 9 | Bolt Assy - Tie (Tiebolt), | | | 40 | | | | (Fairing No. 3 and 6) | | | | | | | Bolt Assy - Tie (Tiebolt), | | | 430 | | | | (Fairing No. 4 and 5) | | | | | | 10 | Link Assy - Hinge | | | 125 | | | | (Fairing No. 3 and 6) | | | | | | | Link Assy - Hinge | | | 510 | | | | (Fairing No. 4 and 5) | | | | | 401 | 11 | Fitting Assy - Hinge (RH side) | 27-51-42| 02 | 205J | | | | (Fairing No. 3 and 6) | | | | | | | Fitting Assy - Hinge (LH side) | | | 210 | | | | (Fairing No. 3 and 6) | | | | | | | Fitting Assy - Hinge (RH side) | | | 585J | | | | (Fairing No. 4 and 5) | | | | | | | Fitting Assy - Hinge (LH side) | | | 580J | | | | (Fairing No. 4 and 5) | | | | | | 12 | Washer (Fairing No. 3 and 6) | | | 110 | | | | Washer (Fairing No. 3 and 6) | | | 115 | | | | Washer (Fairing No. 4 and 5) | | | 500 | | | 13 | Nut (Fairing No. 3 and 6) | | | 120 | | | | Nut (Fairing No. 4 and 5) | | | 505 | 中國航空網 www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：747-400 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 5(22)
