B.
References
(1)
AMM 27-51-31/401, Outboard Flap Track Fairings
C.
Access
(1)
Location Zone 567 Outboard Flap Track Fairing, Outboard Flap, LH (Track No. 1) 565 Inboard Flap Track Fairing, Outboard Flap, LH (Track No. 2) 665 Inboard Flap Track Fairing, Outboard Flap, RH (Track No. 7)
667 Outboard Flap Track Fairing, Outboard Flap, RH (Track No. 8)
D. Procedure
S 026-002
(1)
Do this task: "Outboard Flap Track Fairing Removal" (AMM 27-51-31/401).
S 226-003
(2)
Examine the parts which attach the outboard flap track fairing for worn areas:
(a)
Remove the parts.
(b)
Measure the parts with a micrometer or a vernier caliper.
(c)
Compare the dimensions you measured with the permitted dimensions shown in Fig. 601, 602 and 603.
(d)
Replace the parts which are not in the tolerance.
(e)
Install the parts.
S 426-004
(3) Do this task: "Outboard Flap Track Fairing Installation" (AMM 27-51-31/401).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-31
ALL ú ú 01 Page 601 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
SEE A SNUBBER BLOCK
SEE B
TIEBOLT
TIEBOLT LOCK
TRANSMISSION ADJUSTABLE ROD
A
(2 LOCATIONS)
HINGE FITTING
A
BONDING JUMPER
FIXED FAIRING
MOVABLE FAIRING
ACCESS PLATE
A
Outboard Movable Flap Track Fairing Wear Limits Figure 601 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-31
ALL ú ú 01 Page 602 ú Feb 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
UPPER DOOR LINK
FORWARD AFT DOOR
DOOR LINK LINK
DOOR FWD FITTING
SUPPORT
FITTING
B
B
FAIRINGS NO. 1 AND 8 LINKAGE SHOWN IN RETRACTED POSITION
B
FLAP TRACK
1. FLANGED BUSHING/BOLT
2. BEARING/BOLT
3. BUSHING/BOLT 6. BEARING/BOLT
HINGE FITTING HINGE LINK 5. FLANGED BUSHING/BOLT
FAIRING 7. BUSHING/BOLT4. FLANGED FAIRING
BUSHING/ 8. FLANGED BUSHING BUSHING/ BUSHING
A-A
Outboard Movable Flap Track Fairing Wear Limits
Figure 601 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-31
ALL ú ú 01 Page 603 ú Feb 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
17.
BUSHING/ DOOR FITTING (FAIRINGS NO. 1
18.
AND 8 ONLY)
20. BUSHING/BOLT
14. BUSHING/ BOLT
21. BUSHING/
BUSHING
FLANGED BUSHING/ BUSHING
11. BEARING/BOLT
B-B
Outboard Movable Flap Track Fairing Wear Limits
Figure 601 (Sheet 3)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-31
ALL ú ú 01 Page 604 ú Jun 10/88
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
DESIGN LIMITS WEAR LIMITS
PERMITTED MAXIMUM
DIAMETER
INDEX
WEAR DIAMETER
PART NAME DIM.
NO. MINIMUM MAXIMUM DIMENSION CLEARANCE INCHES INCHES INCHES INCHES (mm) (mm) (mm) (mm)
BUSHING FLANGED ID (12.70) 0.5000 (12.73) 0.5010 (12.81) 0.5045
BEARING BOLT ID OD 0.4995 (12.69) (12.66) 0.4985 0.5015 (12.74) (12.69) 0.4995 0.5045 (12.81) (12.57) 0.4950
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 5(61)
