B.
Access
(1)
Location Zone 567 Outboard Flap Track Fairing, Outboard Flap, LH, (Track No. 1) 565 Inboard Flap Track Fairing, Outboard Flap, LH, (Track No. 2) 665 Inboard Flap Track Fairing, Outboard Flap, RH, (Track No. 7)
667 Outboard Flap Track Fairing, Outboard Flap, RH, (Track No. 8)
C. Procedure
S 864-028
(1) Do this task to pressurize hydraulic system No. 4: "Hydraulic System Pressurization" (AMM 29-11-00/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-40
ALL ú ú 01 Page 414 ú Feb 15/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
S 864-097
WARNING: MAKE SURE THAT PERSONS AND EQUIPMENT ARE CLEAR OF THE LE AND TE
_______ FLAPS AND FLAP DRIVE MECHANISMS BEFORE YOU MOVE THE FLAP CONTROL LEVER. WITH HYDRAULIC POWER REMOVED, THE FLAPS WILL MOVE AUTOMATICALLY BY ELECTRICAL POWER WHEN YOU MOVE THE FLAP CONTROL LEVER.
(2) Put the flap control lever in a position to extend the outboard flaps.
NOTE: Extend the flaps sufficiently to move the fairing for access
____ to the support but not until the geneva cam assembly blocks access.
S 864-030
(3)
Do this task to depressurize hydraulic system No.4: "Hydraulic System Depressurization" (AMM 29-11-00/201).
S 024-031
(4)
Remove the aft roller support (Fig. 401):
(a)
Remove the bolts (38, 39, 40, and 41), washers (45), radius fillers (43 and 46), and nuts (44) that attach the aft roller support to the flap track (Detail D).
(b)
Remove the aft roller support, the shims (42), and the washers (47).
(c)
Disassemble the aft roller support if it is necessary (Section I-I): 1) Disassemble the aft roller support on the inboard tracks:
a) Remove the nut (74), washer (75), and washer (76) that
attach the roller (73) to the shaft (77). b) Remove the roller. c) Remove the nut (80), washer (78), and washer (79) that
attach the shaft to the support (36).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-40
ALL ú ú 01 Page 415 ú Feb 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
d) Remove the shaft. 2) Disassemble the aft roller support on the outboard tracks: a) Remove the nut (82) and washer (83) that attach the
roller (81) to the shaft (84). b) Remove the roller. c) Remove the nut (89) and washer (88) that attach the
shaft to the support (36). d) Disassemble the support and the shaft.
TASK 27-51-40-404-032
9. Aft Roller Support Installation
_______________________________
A. Consumable Materials
(1)
C00528 Compound - Soft Filmed (Corrosion Preventive), MIL-C-11796, Class 3
(2)
C00259 Enamel - Primer, Green, BMS 10-11
(3)
A00247 Sealant - Chromate, BMS 5-95
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-40
ALL ú ú 01 Page 416 ú Feb 18/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
B. Parts ~.............................................................................. | AMM | | AIPC | ................. ............................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ................................................................................ | 401 | 36 |Aft Roller Support (Track No. 1 | | | | | | |and 8)(see items 85, 86 and 87) | | | | | | |Aft Roller Support (Track No. 2 | | | | | | |and 7) | 27-51-40 | 03 | 95 | | | 38 |Bolt (Track No. 1 and 8) | | 01 | 35 | | | |Bolt (Track No. 2 and 7) | | 03 | 70 | | | 39 |Bolt (Track No. 1 and 8) | | 01 | 30 | | | |Bolt (Track No. 2 and 7) | | 03 | 75 | | | 40 |Bolt (Track 1 and 8) | | 01 | 25 | | | |Bolt (Track No. 2 and 7) | | 03 | 65 | | | 41 |Bolt | | 01 | 20 | | | 42 |Shim (Track No. 1 and 8) | | 01 | 40 | | | |Shim (Track No. 2 and 7) | | 03 | 80 | | | 43 |Radius Filler (Track No. 1 and 8 | | 01 | 55 | | | |only) | | | | | | 44 |Nut (Track No. 1 and 8) | | | 65 | | | |Nut (Track No. 2 and 7) | | 03 | 90 | | | 45 |Washer (Track No. 1 and 8) | | 01 | 60 | | | |Washer (Track No. 2 and 7) | | 03 | 85 | | | 46 |Radius Filler (Track No. 1 and 8 | | 01 | 50 | | | |only) | | | | | | 47 |Washer (Track No. 1 and 8) | | | 45 | | | |Washer (Track No. 2 and 7) | | 03 | 78 | | | 73 |Roller | | | 60 | | | 74 |Nut | | | 30 | | | 75 |Washer | | | 35 | | | 76 |Washer | | | 40 | | | 77 |Shaft | | | 63 | | | 78 |Washer | | | 45 | | | 79 |Washer | | | 50 | | | 80 |Nut | | | 55 | | | 81 |Roller | | 01 | 115 | | | 82 |Nut | | | 90 | | | 83 |Washer | | | 100 | | | 84 |Shaft | | | 120 | | | 85 |Fitting | | | 130 | | | 86 |Fitting | | | 150 | | | 87 |Fitting | | | 125 | | | 88 |Washer | | | 105 | | | 89 |Nut | | | 110 | | | 117 |Washer | | | 95 | 2......…........…...................................…..........….....….........1 中國航空網 www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：747-400 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 5(108)
