27-51-40
ALL ú ú 01 Page 436 ú Jun 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
TASK 27-51-40-834-080
16. Aftflap Drive Mechanism Adjustment
__________________________________
A. Parts ~.............................................................................. | AMM | | AIPC | ................. ............................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ................................................................................ | 401 | 3 |Actuator Rod (Tracks No. 1 and 8) | 27-51-40 | 01 | 240 | | | |Actuator Rod (Tracks No. 2 and 7) | | 03 | 170 | | | 28 |Washer (Track No. 1 and 8) | | 01 | 180 | | | |Washer (Track No. 2 and 7) | | 03 | 115 | | | 29 |Bolt (Track No. 1 and 8) | | 01 | 175 | | | |Bolt (Track No. 2 and 7) | | 03 | 110 | | | 30 |Washer (Track No. 1 and 8) | | 01 | 195 | | | |Washer (Track No. 2 and 7) | | 03 | 125 | | | 31 |Washer (Track No. 1 and 8) | | 01 | 185 | | | |Washer (Track No. 2 and 7) | | 03 | 120 | | | 32 |Nut (Track No. 1 and 8) | | 01 | 200 | | | |Nut (Track No. 2 and 7) | | 03 | 130 | | | 33 |Bushing (Track No. 1 and 8) | | 01 | 190 | | | |Bushing (Track No. 2 and 7) | | 03 | 135 | 2......…........…...................................…..........…......…........1
B. References
(1)
AMM 24-22-00/201, Manual Control
(2)
AMM 29-11-00/201, Main Hydraulic Supply System
C.
Access
(1)
Location Zone 567 Outboard Flap Track Fairing, Outboard Flap, LH, (Track No. 1) 565 Inboard Flap Track Fairing, Outboard Flap, LH, (Track No. 2) 665 Inboard Flap Track Fairing, Outboard Flap, RH, (Track No. 7)
667 Outboard Flap Track Fairing, Outboard Flap, RH, (Track No. 8)
D. Procedure
S 864-081
(1)
Do this task: "Supply Electrical Power" (AMM 24-22-00/201).
S 864-082
(2)
Move the flaps to the correct position:
(a)
Make sure that the two actuator rods (3) are disconnected from the aftflap (Fig. 401).
(b)
Make sure the aftflap is attached to the midflap.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-40
ALL ú ú 01 Page 437 ú Feb 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
CAUTION:_______DO NOT LET THE AFTFLAP ARMS TOUCH THE MIDFLAP. THEY WILL CAUSE DAMAGE TO THE MIDFLAP.
(c)
Make sure the two actuator rods will not move when you move the flaps.
(d)
Make sure the hooks on the geneva cams (35) are in the released position (Detail E, Fig. 401).
(e)
Push the ALTN FLAPS ARM switch to put the flap system in alternate control.
CAUTION:_______MONITOR THE FLAP MOVEMENT CAREFULLY. THE FLAPS CAN BE DAMAGED BY INCORRECTLY ADJUSTED COMPONENTS.
DO NOT MOVE THE FLAPS IF THE AFTFLAP IS NOT ATTACHED TO THE MIDFLAP. THE AFTFLAP AND THE MIDFLAP WILL BE DAMAGED.
MAKE SURE THE HOOK ON THE GENEVA CAM MECHANISM IS IN THE RELEASED POSITION BEFORE YOU MOVE THE FLAPS. YOU WILL CAUSE DAMAGE THE FLAPS.
(f) Turn the ALTN FLAPS switch to move the ball screw nut to the position shown in Fig. 402.
S 864-094
(3)
Open these circuit breakers and attach DO-NOT-CLOSE tags:
(a)
P415 Power Distribution Panel - Right
1) 415M24 ALT OUTBD TE FLAPS
(b)
Make sure the hook on the geneva cam mechanism is in the latched position after the flap extension.
(c)
Manually move the aftflap to the position shown in Section B-B, Fig. 401.
S 434-083
(4)
Install the actuator rod on the aftflap fitting (Section D-D):
(a)
Put the actuator rods in the aftflap fittings.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-40
ALL ú ú 02 Page 438 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 5(118)
