(2)
The manual movement of the aftflaps

 (3)
An adjustment of the actuator rod length

 (4)
An adjustment of the bulb seal

 (5)
The retraction of the inboard flaps.

 TASK 27-51-39-004-001
 2.  Midflap Crank Removal_____________________
 A.  References
 (1)
AMM 29-11-00/201, Main Hydraulic Supply System

 (2)
AIPC 27-51-39 Fig. 1

 (3)
AIPC 27-51-39 Fig. 4

 B.  
Access

 (1)  
Location Zone 563 Outboard Flap Track Fairing, Inboard Flap, LH (Track No. 3) 561 Inboard Flap Track Fairing, Inboard Flap, LH (Track No. 4) 661 Inboard Flap Track Fairing, Inboard Flap, RH (Track No. 5)

 663  Outboard Flap Track Fairing, Inboard Flap, RH (Track No. 6)
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-51-39
 ALL  ú ú 01 Page 401 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 C. Procedure
 S 864-002
 (1)  Do this task to pressurize hydraulic system No. 1: "Hydraulic System Pressurization" (AMM 29-11-00/201).
 S 864-119
 WARNING: MAKE SURE THAT PERSONS AND EQUIPMENT ARE CLEAR OF THE LE AND TE
_______ FLAPS AND FLAP DRIVE MECHANISMS BEFORE YOU MOVE THE FLAP CONTROL LEVER. WITH HYDRAULIC POWER REMOVED, THE FLAPS WILL MOVE AUTOMATICALLY BY ELECTRICAL POWER WHEN YOU MOVE THE FLAP CONTROL LEVER.
 (2)  
Put the flap control lever in the 30-unit detent to extend the inboard flaps.

 S 864-004

 (3)  
Do this task to depressurize hydraulic system No. 1: "Hydraulic System Depressurization" (AMM 29-11-00/201).

 S 434-005

 (4)  
Attach the aftflap to the midflap.

 S 024-006

 (5)  
Remove the midflap crank (4) from the midflap fitting (6)
 (Section A-A, Fig. 401):

 (a)  
Remove the three bolts (15) and washers (14) that attach the retainer (12) and the shim (13).

 (b)  
Remove the retainer and the shim.

 (c)  
Remove the midflap crank (4) from the midflap fitting (6).

 S 034-007
 (6)  
Disconnect the pushrod (1) from the midflap crank:

 (a)
Remove the bolt (8), washers (9 and 10), and nut (11).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-51-39
 ALL  ú ú 01 Page 402 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

SEE  A  SEE  C 
SEE  B 
A 
MIDFLAP  A  1. PUSHROD 
B  4. MIDFLAP CRANK  A 
AFTFLAP  B  SEE  E 
3. AFTFLAP FITTING  SEE  G  B  2. ACTUATOR ROD 

Inboard Aftflap Drive Mechanism Assembly
Figure 401 (Sheet 1)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-51-39
 ALL  ú ú 01 Page 403 ú Feb 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

5. BOLT

B-B

Inboard Aftflap Drive Mechanism Installation
Figure 401 (Sheet 2)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-51-39
 ALL  ú ú 01 Page 404 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
18. GENEVA CAM
CARRIAGE 
F 
SEE F E  E  C  F H  19. AFT ROLLER SUPPORT 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 5(82)