(2)  
IPC 32-21-04, IPC 32-21-05 Fig. 1, IPC 32-34-02 Fig. 2

 B.  
Access

 (1)  
Location Zone
 715 Nose Gear

 C.  
Procedure

 S 026-002
 (1)  
Do this task: "Removal of the Drag Strut on the Nose Landing Gear" (Ref 32-21-04/401).

 S 226-003

 (2)  
Examine the components of the drag strut on the nose landing gear for corrosion and damage.

 (a)  
Measure the parts at the locations shown in figure 601.

 (b)  
Compare the measured dimensions to the wear limits in figure

 601.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-21-04
 ALL  ú ú 01 Page 601 ú Oct 10/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

SEE A
SEE B UPPER DOWNLOCK LINK SHAFT ATTACH BOLT (2 PLACES)
FITTING SUPPORT  ACTUATOR DOWNLOCK 
A 
LINK VERTICAL 
FITTING CRANK DOWNLOCK  C C  C B  B  B  A  FITTING CRANK ACTUATOR 
RELEASE LINK DOWNLOCK  C  B 

A
Nose Gear Drag Strut Wear Limits Figure 601 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-21-04
 ALL  ú ú 01 Page 602 ú Jun 10/88
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

LOWER DOWNLOCK LINK
LOWER SPRING BUNGEE DRAG
STRUT
BUNGEE ATTACHMENT BOLT ASSEMBLY
D
D
6.  BUSHINGS/BEARING  B 
7.  BOLT/BEARING 
5.  BUSHING/BOLT 
(2 PLACES) BUSHING/SHAFT SUPPORT FITTING ASSY 1.  UPPER DRAG STRUT  SUPPORT FITTING ASSY 

DOWNLOCK CRANK FITTING
ACTUATOR CRANK FITTING
2. BUSHING/SHAFT
4. SUPPORT (4 PLACES)
ASSY/CRANK FITTINGS 3. SUPPORT ASSY/STRUT ASSY
A-A
Nose Gear Drag Strut Wear Limits Figure 601 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-21-04
 ALL  ú ú 01 Page 603 ú Jun 10/88
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
8. BUSHING/BOLT

B-B
C-C

LOWER TRIPOD BRACE
D-D
Nose Gear Drag Strut Wear Limits Figure 601 (Sheet 3)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-21-04
 ALL  ú ú 01 Page 604 ú Jun 10/88
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

Nose Gear Drag Strut Wear Limits
Figure 601 (Sheet 4)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-21-04
 ALL  ú ú 03 Page 605 ú Feb 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

INDEX NO.  PART NAME  DIM.  DESIGN LIMITS  WEAR LIMITS  REPLACE WORN PART  REPAIR WORN PART  REPAIR INSTR. 
DIAMETER  DIM.*[30] WEAR PER-MITTED  DIAM CLEAR-MAX ANCE 
MIN  MAX 
10  BOLT  *[15]  1.800  1.810  1.820  0.028  X  *[1] 
BUSHINGS  *[16]  1.787  1.797  1.777  X  *[11] 
11  BUSHING  ID  0.3745  0.3770  0.3782  0.0052  X  *[17] 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 起落架 LANDING GEAR 3(141)