TASK 32-13-18-404-005
 3.  Body Gear Truck Shield Installation___________________________________
 A. References
 (1)  
AMM 09-11-00/201, Towing

 (2)  
AMM 32-00-30/201, Landing Gear Door Locks

 (3)  
IPC 32-13-18 Fig. 1

 B.
Access

 (1)  
Location Zone
 755 Body Landing Gear, LH
 765 Body Landing Gear, RH

 C.
Procedure

 S 424-008
 (1)  
Install the truck shield (Fig. 401):

 (a)  
Install the six bolts that attach the truck shield to the two forward brackets and one aft bracket.

 (b)  
Install the six bolts that attach the shield to the pull box.

 (c)  
If it is not easy to install the bolts, adjust the position of the pull box.

 (d)  
Connect the brake rod lanyards to the shield with the pin and the cotter pin.

 (e)  
Connect the hydraulic guides to the shield and the forward bracket.

 S 094-013
 WARNING: YOU MUST CAREFULLY DO THE STEPS IN THE TASK BELOW TO REMOVE THE
_______ DOOR LOCKS FROM THE LANDING GEAR DOORS. THE DOORS CAN CLOSE QUICKLY IF YOU DO NOT REMOVE THE DOOR LOCKS CORRECTLY. THIS CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
 (2)  Do this task: "Removal of the Door Locks from the Wing Landing Gear" (AMM 32-00-30/201).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-13-18
 ALL  ú ú 01 Page 404 ú Feb 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 094-014
 (3)  Do this task: "Removal of the Door Locks from the Body Landing Gear" (AMM 32-00-30/201).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-13-18
 ALL  ú ú 01 Page 405 ú Feb 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 BODY GEAR DRAG STRUT COMPONENT ASSEMBLY - REMOVAL/INSTALLATION
______________________________________________________________
 1. General
_______
 A. This procedure contains two tasks:
 B. The removal of the component assembly for the drag strut.
 C. The installation of the component assembly for the drag strut.
 TASK 32-13-19-004-001
 2. The Body Gear Drag Strut Component Assembly Removal (Fig. 401)
__________________________________________________
 A. Special Tools and Equipment
 (1)  
OHME65B00163 - Body Gear Drag Strut Strong Back

 B.
Standard Tools and Equipment

 (1)  
Hoist - Portable, 1000-Pound Capacity

 C.
References

 (1)  
AMM 07-11-01/201, Jacking Airplane

 (2)  
AMM 09-11-00/201, Towing

 (3)  
AMM 29-11-00/201, Main Hydraulic Supply System

 (4)  
AMM 32-00-30/201, Landing Gear Door Locks

 (5)  
AMM 32-13-10/201, Body Gear Lower Jury Strut

 (6)  
AMM 32-14-00/501, Body Gear Doors

 (7)  
AMM 32-33-15/401, Body Gear Downlock Actuator

 (8)  
AMM 32-61-00/501, Landing Gear Position Indicating and Warning System

 (9)  
AIPC 32-13-02 Fig. 2

 (10)
 AIPC 32-13-05 Fig. 1

 (11)
 AIPC 32-13-07 Fig. 1,

 (12)
 AIPC 32-13-09 Fig. 2

 (13)
 AIPC 32-13-67 Fig. 1

 (14)
 AIPC 32-33-15 Fig. 1

 D.
Access

 (1)  
Location Zone
 755 Body Landing Gear, LH
 765 Body Landing Gear, RH

 E.
Prepare for the Removal

 S 864-047
 WARNING: YOU MUST CAREFULLY INSTALL THE GROUND LOCKS IN ALL LANDING
_______ GEAR. AN ACCIDENTAL RETRACTION OF THE LANDING GEAR CAN CAUSE INJURY TO PERSONS AND DAMAGE TO EQUIPMENT.
 (1)  Install the ground locks in all landing gear (AMM 09-11-00/201).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 起落架 LANDING GEAR 3(46)