曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 C.  Measure the fit of the upper jury strut spindle
 D.  Measure the fit of the door actuator strut for the lower drag strut door.
 E.  You must remove the component assembly for the drag strut to do the inspection check.
 TASK 32-13-19-206-001
 2.  The Body Gear Drag Strut Component Assembly for Worn areas Examination______________________________________________________________________ (Fig. 601)
 A.  References
 (1)  
20-11-01/401, Bearings and Bushings

 (2)  
32-13-19/401, Body Gear Drag Strut Component Assembly

 (3)  
IPC 32-13-05 Fig. 1, IPC 32-13-09 Fig. 2

 B.  
Access

 (1)  
Location Zone
 755 Body Landing Gear, LH
 765 Body Landing Gear, RH

 C.  
Procedure

 S 026-002
 (1)  
Remove the component assembly for the drag strut (Ref 32-13-19/401).

 S 226-003

 (2)  
Do a check of the worn area limits for the component assembly for the drag strut.

 (a)  
Measure the parts if it is necessary and compare the dimensions to the limit dimensions.

 (b)  
If the part is not less than the tolerance, repair or replace the part if it is necessary.

 S 426-004
 (3)  Install the component assembly for the drag strut (Ref 32-13-19/401).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-13-19
 ALL  ú ú 01 Page 601 ú Oct 10/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

SPINDLE
1.
6.  
BUSHING/ SPACER AND

7.  
SPACER/BOLT

 

Body Gear Drag Strut Component Assembly Wear Limits
Figure 601 (Sheet 1)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-13-19
 ALL  ú ú 01 Page 602 ú Jun 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

1. BUSHING/SPINDLE 2. BUSHING/SPINDLE

UNIVERSAL ASSEMBLY
D-D C-C
Body Gear Drag Strut Component Assembly Wear Limits Figure 601 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-13-19
 ALL  ú ú 01 Page 603 ú Jun 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

INDEX NO.  PART NAME  DIM.  DESIGN LIMITS  WEAR LIMITS  PART WORN REPLACE  PART WORN REPAIR  REPAIR INSTR. 
DIAMETER  DIM. 5 MITTED PER-WEAR  ANCE MAX CLEAR-DIAM 
MIN  MAX 
1  BUSHING  ID  3.802  3.804  3.8110  0.0120  X  1 
SPINDLE  OD  3.796  3.799  3.7920  X  2 
2  BUSHING  ID  4.002  4.004  4.008  0.0120  X  1 
SPINDLE  OD  3.996  3.999  3.992  X  2 
3  BUSHING  ID  1.876  1.877  1.8815  0.0077  X  1 
SPINDLE  OD  1.872  1.874  1.8690  X  2 
4  BUSHING  ID  2.126  2.127  2.1320  0.0080  X  1 
SPINDLE  OD  2.122  2.124  2.1190  X  2 
5  BUSHING  ID  2.500  2.5015 3  2.506  0.0070  X  2 
PIN  OD  2.498  2.499  2.495  X  2 
6  BUSHING  ID  0.810  4 0.811  0.8153  0.0063  X 
SPACER  OD  0.808  0.809  0.806  X 
7  SPACER  ID  0.625  0.626  0.6275  0.0045  X 
BOLT  OD  0.623  0.624  0.6215  X  2 

PROCURE REPLACEMENT BUSHING. INSTALL IN KEEL BEAM ATTACH FITTING PER 20-11-01 WITH INTERFERENCE
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 起落架 LANDING GEAR 3(50)