曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

2. Remove/Install the ELECTRIC MASTER Key Switch
A. Remove the ELECTRIC MASTER Key Switch
Detail Steps/Work Items Key Items/References
WARNING: MAKE SURE THAT THE ENGINE IS SAFE BEFORE YOU DO ANY
WORK ON THE STARTER SYSTEM. IF THE ENGINE STARTS THE
PROPELLER CAN CAUSE INJURY OR DEATH.
(1) Make sure that the engine is safe:
S Set the ELECTRIC MASTER key switch to
OFF.
S Set the ENGINE MASTER switch to OFF.
S Set the power lever to IDLE.
(2) Remove the engine top cowling. Refer to Section 71-11.
(3) Disconnect the airplane main battery. Refer to Section 24-34.
(4) Remove the instrument panel cover. Refer to Section 25-10.
(5) Release the retaining nut from the cockpit side of
the ELECTRIC MASTER key switch.
(6) Move the ELECTRIC MASTER key switch
towards the front of the airplane.
(7) Disconnect the cables from the ELECTRIC
MASTER key switch
Make a note of the position of the
cables.
(8) Remove the ELECTRIC MASTER key switch
from the airplane.
AIRCRAFT
Starting DA 40 Series
AMM
Page 202
20 Sep 2007 80-01-00 Doc # 6.02.01
Rev. 5
B. Install the ELECTRIC MASTER Key Switch
Detail Steps/Work Items Key Items/References
WARNING: MAKE SURE THAT THE ENGINE IS SAFE BEFORE YOU DO ANY
WORK ON THE STARTER SYSTEM. IF THE ENGINE STARTS THE
PROPELLER CAN CAUSE INJURY OR DEATH.
(1) Make sure that the engine is safe:
S Set the ELECTRIC MASTER key switch to
OFF.
S Set the ENGINE MASTER switch to OFF.
S Set the power lever to IDLE.
(2) Put the ELECTRIC MASTER key switch in
position between the instrument panel and the
firewall.
(3) Connect the cables to the ELECTRIC MASTER
key switch
Refer to the wiring diagrams and the
notes you made during removal.
(4) Move the ELECTRIC MASTER key switch into
position in the instrument panel.
(5) Install the retaining nut to the cockpit side of the
ELECTRIC MASTER key switch.
(6) Install the instrument panel cover. Refer to Section 25-10.
(7) Connect the airplane main battery. Refer to Section 24-34.
(8) Install the engine top cowling. Refer to Section 71-11.
(9) Do an engine ground run-up. Refer to Section 71-01.
AIRCRAFT
DA 40 Series
AMM
Starting
Doc # 6.02.01
Rev. 5 80-01-00 Page 203
20 Sep 2007
3. Remove/Install the ENGINE MASTER Switch
A. Remove the ENGINE MASTER Switch
Detail Steps/Work Items Key Items/References
WARNING: MAKE SURE THAT THE ENGINE IS SAFE BEFORE YOU DO ANY
WORK ON THE STARTER SYSTEM. IF THE ENGINE STARTS THE
PROPELLER CAN CAUSE INJURY OR DEATH.
(1) Make sure that the engine is safe:
S Set the ELECTRIC MASTER key switch to
OFF.
S Set the ENGINE MASTER switch to OFF.
S Set the power lever to IDLE.
(2) Remove the engine top cowling. Refer to Section 71-11.
(3) Disconnect the airplane main battery. Refer to Section 24-34.
(4) Remove the instrument panel cover. Refer to Section 25-10.
(5) Release the retaining nut from the cockpit side of
the ENGINE MASTER switch.
(6) Move the ENGINE MASTER switch towards the
front of the airplane.
(7) Disconnect the cables from the ENGINE
MASTER switch
Make a note of the position of the
cables.
(8) Remove the ENGINE MASTER switch from the
airplane.
AIRCRAFT
Starting DA 40 Series
AMM
Page 204
20 Sep 2007 80-01-00 Doc # 6.02.01
Rev. 5
B. Install the ENGINE MASTER Switch
Detail Steps/Work Items Key Items/References
WARNING: MAKE SURE THAT THE ENGINE IS SAFE BEFORE YOU DO ANY
WORK ON THE STARTER SYSTEM. IF THE ENGINE STARTS THE
PROPELLER CAN CAUSE INJURY OR DEATH.
(1) Make sure that the engine is safe:
S Set the ELECTRIC MASTER key switch to
OFF.
S Set the ENGINE MASTER switch to OFF.
S Set the power lever to IDLE.
(2) Put the ENGINE MASTER switch in position in
the instrument panel.
(3) Connect the cables to the ENGINE MASTER
switch.
Refer to the wiring diagrams and the
notes you made during removal.
(4) Move the ENGINE MASTER switch into position
in the instrument panel.
(5) Install the retaining nut to the cockpit side of the
ENGINE MASTER switch.
(6) Install the instrument panel cover. Refer to Section 25-10.
(7) Connect the airplane main battery. Refer to Section 24-34.
(8) Install the engine top cowling. Refer to Section 71-11.
(9) Do an engine ground run-up. Refer to Section 71-01.
AIRCRAFT
DA 40 Series
AMM
Starting
Doc # 6.02.01
Rev. 5 80-01-00 Page 205
20 Sep 2007
4. Remove/Install the Starter Relay
A. Remove the Starter Relay
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：鉆石40系列AMM 3(104)