4. Procedure
_________ Subtask 25-45-13-020-050
A. Removal of the Lavatory Mirror
(Ref. Fig. 401/TASK 25-45-13-991-001)
(1)
Remove the screws (5) and if necessary the angle (4) from the lavatory wall.
(2)
Lift the lavatory mirror (1) and remove it from the screws (2).
(3)
Remove the screws (6) and the mirror attachment brackets (7) from the lavatory mirror (1).
EFF : ALL
25-45-13Page 401
Lavatory Mirror
Figure 401/TASK 25-45-13-991-001
EFF : ALL 25-45-13 Page 402
Feb 01/98
CES
TASK 25-45-13-400-001 Installation of the Lavatory Mirror
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from the External Power 25-45-13-991-001 Fig. 401
3. Job Set-up
__________ Subtask 25-45-13-860-050
A. Aircraft Maintenance Configuration
(1) Make sure that the ground service network is energized
(Ref. TASK 24-42-00-861-001).
4. Procedure
_________ Subtask 25-45-13-210-050
A. Preparation for Installation
(1)
Clean the component interface and/or the adjacent area.
(2)
Make sure that the parts retained from the removed component are clean and in the correct condition.
(3)
Do an inspection of the component interface and/or the adjacent area.
EFF : ALL
25-45-13Page 403
Subtask 25-45-13-420-050
B. Installation of the Lavatory Mirror
(Ref. Fig. 401/TASK 25-45-13-991-001)
(1)
Position the mirror attachment brackets (7) on the Lavatory mirror
(1) and install the screws (6).
(2)
Install the lavatory mirror (1) with the attachment brackets (7) on the screws (2) and the foam plates (3).
(3)
Install the screw (5) and if necessary the angle (4).
5. Close-up
________ Subtask 25-45-13-862-050
A. De-energize the ground service network
(Ref. TASK 24-42-00-862-001).
EFF : ALL
25-45-13Page 404
DISPENSER - SOAP - REMOVAL/INSTALLATION_______________________________________ TASK 25-45-14-000-001
Removal of the Soap Dispenser 1. Reason for the Job__________________
R Self Explanatory 2. Job Set-up Information______________________
R A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power
**ON A/C 001-003, 051-052,
25-45-14-991-001 Fig. 401 **ON A/C 004-049, 053-099, 101-105, 151-199, 201-228, 301-302,
R 25-45-14-991-001-A Fig. 401A **ON A/C 106-149, 229-299, 303-399, 401-499,
25-45-14-991-001-B Fig. 401B
EFF : ALL
25-45-14Page 401
**ON A/C ALL
3. Job Set-up__________ Subtask 25-45-14-861-050
R A. Aircraft Maintenance Configuration (1) Energize the ground service network (Ref. TASK 24-42-00-861-001). 4. Procedure_________ **ON A/C 001-049, 051-099, 101-105, 151-199, 201-228, 301-302,
Subtask 25-45-14-020-050
R A. Removal of the Soap Dispenser **ON A/C 001-003, 051-052,
R (Ref. Fig. 401/TASK 25-45-14-991-001) **ON A/C 004-049, 053-099, 101-105, 151-199, 201-228, 301-302,
R (Ref. Fig. 401A/TASK 25-45-14-991-001-A) **ON A/C 001-049, 051-099, 101-105, 151-199, 201-228, 301-302,
(1) Open the access door (1). (2) Remove the soap container (9) from the shank (3). (3) Remove the lock-nut (8) the rubber washer (7) and the lock-nut (6). (4) Remove the spout (2), together with the shank (3), the washer (4) and the rubber washer (5) from the wash basin assembly (10).
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EQUIPMENT/FURNISHINGS 設備3(114)
