(Ref. Fig. 401/TASK 25-35-29-991-001)
 (1)
 Remove the blanking caps from the electrical connectors.

 (2)
 Do an inspection of the component interface and/or the adjacent area.

 (3)
 Make sure that the electrical connectors are clean and in the correct condition.

 (4)
 Carefully push the refrigerator (4) into the galley.

 (5) Tighten the screws (1). Subtask 25-35-29-865-052
 B. Remove the safety clip(s) and tag(s), and close the related circuit
 breaker(s).

 Subtask 25-35-29-861-051
 C. Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002). Subtask 25-35-29-710-050
 D. Do the operational test of the refrigerator (Ref. TASK 25-35-00-710-024).
 5. Close-up
________ Subtask 25-35-29-410-050
 A. Close-up
 (1)
 Install the related containers in the related galley.

 (2)
 Make sure that the work area is clean and clear of tool(s) and other items.

 Subtask 25-35-29-862-050
 B. De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).

 CONTROL PANEL - GALLEY - REMOVAL/INSTALLATION
_____________________________________________
 TASK 25-35-34-000-001 Removal of the Galley Control-Panel
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking caps
 No specific circuit breaker(s) safety clip(s)

 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001  Energize the Ground Service Network from the External Power 25-35-34-991-001 Fig. 401
 3. Job Set-up
__________ Subtask 25-35-34-861-050
 A. Energize the Ground Service Network (Ref. TASK 24-42-00-861-001)
 EFF : ALL
25-35-34Page 401

 Subtask 25-35-34-865-050
 B. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
**ON A/C 001-049, 051-060, 101-102, 201-201,
 122VU ELEC/GALLEY/CTL **ON A/C ALL 1XA  S26
R  122VU ELEC/GALLEY/CNTOR **ON A/C 061-099, 103-149, 151-199, 202-299, 301-399, 401-499, 7MC  S28 
122VU ELEC/GALY & CAB/CTL **ON A/C ALL 1XA  S26
 123VU FWD GALLEY/FEEDER F 123VU AFT GALLEY/FEEDER E **ON A/C 301-399, 16MC 14MC  AC10AF09
R  123VU FWD GALLEY/FEEDER C 123VU FWD GALLEY/FEEDER D  1MC 2MC  AE03AE02 
R  **ON A/C 301-399, 401-499, 
R R  123VU AFT GALLEY/FEEDER A **ON A/C 401-499,  3MC  AF04 
R R R  123VU AFT GALLEY/FEEDER B 123VU FWD GALLEY/FEEDER D 123VU FWD GALLEY/FEEDER C  12MC 2MC 1MC  AD09 AD04 AF09

 EFF : ALL
25-35-34Page 402
Aug 01/05

R **ON A/C ALL
 4. Procedure
_________
 Subtask 25-35-34-020-050

 A. Removal of the Galley Control-Panel
 (Ref. Fig. 401/TASK 25-35-34-991-001)

 (1)
 Remove the screws (1).

 (2)
 Carefully pull the galley control-panel (2) out of the galley.

 (3)
 Disconnect the electrical connectors (3).

 (4)
 Remove the galley control-panel (2) from the galley.

 (5)
 Put blanking caps on the disconnected electrical connectors.

 EFF : ALL
25-35-34Page 403

 Galley Control-Panel Figure 401/TASK 25-35-34-991-001
R  EFF : CES  ALL  25-35-34 Page 404 May 01/04 

 TASK 25-35-34-400-001 Installation of the Galley Control-Panel
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EQUIPMENT/FURNISHINGS 設備3(60)