A. Aircraft Maintenance Configuration
 (1) Energize the ground service network
 (Ref. TASK 24-42-00-861-001).

 EFF : ALL
25-45-25Page 401

 4. Procedure
_________
 **ON A/C 001-049, 051-058, 101-101,

 Subtask 25-45-25-020-050
 A. Removal of the Baby Nursing Table (For Lavatory A only)
 (Ref. Fig. 401/TASK 25-45-25-991-001)

 (1)
 Release the latch (6) and open the baby nursing table (1).

 (2)
 Remove the screws (3) and the washers (2).

 (3)
 Carefully remove the baby nursing table (1).

 (4)
 Remove the screw (7), the latch (6), the spacers (5) and the tube (4).

R **ON A/C 059-099, 102-149, 151-199, 201-299, 301-399, 401-499,
 Subtask 25-45-25-020-050-A
 A. Removal of the Baby Nursing Table (For Lavatory A only)
 (Ref. Fig. 401A/TASK 25-45-25-991-001-A)

 (1)
 Release the latch (2) and open the baby nursing table (4).

 (2)
 Remove the screws (8).

 (3)
 Carefully remove the baby nursing table (4).

 (4)
 Remove the screws (5), the washers (6) and the support (7).

 (5)
 Remove the screws (3), the latch (2) and the tape (1).

 EFF : ALL
25-45-25Page 402

 Baby Nursing Table (Lavatory A) Figure 401/TASK 25-45-25-991-001 
R  EFF :  001-049, 051-058, 101-101,  25-45-25 Page 403 May 01/05
 CES 

 Baby Nursing Table (Lavatory A) Figure 401A/TASK 25-45-25-991-001-A 
R  EFF : 059-099, 102-149, 151-199, 201-299, 301-399, 401-499,  25-45-25 Page 404 Aug 01/05
 CES 

R  **ON A/C ALL 
R  Subtask 25-45-25-020-051 
R  B. Removal of the Baby Nursing Table 
R  (Ref. Fig. 402/TASK 25-45-25-991-002) 
R  (1) Release the latch (1) and open the baby nursing table (4). 
R  (2) Remove the screws (3). 
R  (3) Carefully remove the baby nursing table (4). 
R  (4) Remove the screws (6), the washers (7) and the support (8) 
R  (5) Remove the screws (2) and the latch (1).

 EFF : ALL
25-45-25Page 405

R R  Baby Nursing Table Figure 402/TASK 25-45-25-991-002
 EFF :  ALL  25-45-25 Page 406 May 01/00
 CES 

 TASK 25-45-25-400-001
 Installation of the Baby Nursing Table
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from the External Power
 **ON A/C 001-049, 051-058, 101-101,
 25-45-25-991-001 Fig. 401 R **ON A/C 059-099, 102-149, 151-199, 201-299, 301-399, 401-499,
 25-45-25-991-001-A Fig. 401A
 **ON A/C ALL
 25-45-25-991-002 Fig. 402
 3. Job Set-up
__________
 Subtask 25-45-25-860-050

 A. Aircraft Maintenance Configuration
 (1) Make sure that the ground service network is energized (Ref. TASK 24-42-00-861-001).
 EFF : ALL
25-45-25Page 407

 4. Procedure
_________
 Subtask 25-45-25-210-050

 A. Preparation for Installation
 (1)
 Clean the component interface and/or the adjacent area.

 (2)
 Make sure that the parts retained from the removed component are clean and in the correct condition.

 (3) Do an inspection of the component interface and/or the adjacent area. **ON A/C 001-049, 051-058, 101-101,
 Subtask 25-45-25-420-050
 B. Installation of the Baby Nursing Table (For Lavatory A only)
 (Ref. Fig. 401/TASK 25-45-25-991-001)

 (1)
 Put the tube (4) with the spacers (5) in position and install the latch (6) with the screw (7).

 (2)
 Put the baby nursing table (1) in position and install the screws (3) and the washers (2) to secure the hinge to the lavatory L/H side wall.

R **ON A/C 059-099, 102-149, 151-199, 201-299, 301-399, 401-499,
 Subtask 25-45-25-420-050-A
 B. Installation of the Baby Nursing Table (For Lavatory A only)
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EQUIPMENT/FURNISHINGS 設備3(128)