(2)
Make a mark on the DMC3 (Ref. TASK 31-63-00-440-001).
(3)
Install the DMC3 in the position of the defective DMC (Ref. TASK 31-63-34-400-001).
5. Close-up
________
Subtask 31-63-00-860-054
A. Make sure that the work area is clean and clear of tool(s) and other items.
R 1EFF : 401-499, 1 31-63-00Page 402 1 1 Config-2 Aug 01/05 1 1 1CES 1
TASK 31-63-00-440-002
Reactivation of the DMC (1WT1/1WT2/1WT3)
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
31-63-00-040-001 Deactivation of the DMC (1WT1/1WT2/1WT3) 31-63-34-400-001 Installation of the DMC (1WT1,1WT2,1WT3)
3. Job Set-up
__________ Subtask 31-63-00-865-054
A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU EIS/DMC3/SWTG 21WT3 E07 121VU EIS/DMC3/SPLY 10WT3 Q09
R 1EFF : 401-499, 1 31-63-00Page 403 1 1 Config-2 Aug 01/05 1 1 1CES 1 Subtask 31-63-00-865-055
B. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------FOR 1WT1
49VU EIS/DMC1/SPLY 10WT1 E11 49VU EIS/DMC1/SWTG 21WT1 E09
FOR 1WT2 121VU EIS/DMC2/SPLY 10WT2 Q08 121VU EIS/DMC2/SWTG 21WT2 R08
4. Procedure
_________
Subtask 31-63-00-420-051
A. Reactivation of the DMC
(1)
Remove the DMC with the mark and install it in the position 3 (Ref. TASK 31-63-00-040-001) (Ref. TASK 31-63-34-400-001).
(2)
Install a new DMC in the position of the DMC1 (DMC2) (Ref. TASK 31-63-34-400-001).
5. Close-up
________
Subtask 31-63-00-860-055
A. Make sure that the work area is clean and clear of tool(s) and other items.
R 1EFF : 401-499, 1 31-63-00Page 404 1 1 Config-2 Aug 01/05 1 1 1CES 1
DISPLAY MANAGEMENT COMPUTER (DMC) - REMOVAL/INSTALLATION
________________________________________________________ TASK 31-63-00-040-003 Deactivation of the DMC (1WT1/1WT2/1WT3)
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
31-63-00-440-001 Reactivation of the DMC (1WT1/1WT2/1WT3)
(Installation of the DMC3 in its initial position) 31-63-34-000-001 Removal of the DMC (1WT1,1WT2,1WT3) 31-63-34-400-001 Installation of the DMC (1WT1,1WT2,1WT3)
3. Job Set-up
__________ Subtask 31-63-00-860-056
A. In the subtask 31-63-00-865-05600-001, open the circuit breakers related to the DMC 3 then open the circuit breakers related to the defective DMC only (DMC 1 or DMC 2).
1EFF : 106-149, 303-399, 1 31-63-00Page 401 1 1 Config-3 Aug 01/05 1 1 1CES 1 Subtask 31-63-00-865-056
B. Open, safety and tag this(these) circuit breaker(s):
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 指示/記錄系統 7(158)
