the SD, the logics and the associated controls. 31-68-00-EIS switching
-
The purpose of this document is to give the detailed operation of the various switching possibilities (manual or automatic reconfiguration) and the associated DMC/DU connections.
31-69-00-EIS test/Built-In Test Equipment (BITE)
-
The purpose of this document is to give the description of the DMC BITE for maintenance purpose.
2. Component Location
__________________
R 1EFF : 401-499, 1 31-60-00Page 6 1 1 Config-2 Aug 01/05 1 1 1CES 1
EIS - Chapters
Figure 003
R 1EFF : 401-499, 1 31-60-00 Page 7
1 1 Config-2 Aug 01/05
1 1
1CES 1
A. Components of the Electronic Instrument System (EIS)
(1) The EIS includes the following components:
(a)
2 DUs housed in racks on the Captain's main instrument panel (CAPT PFD DU and ND DU),
(b)
2 DUs housed in racks on the First Officer's main instrument panel (F/O PFD DU and ND DU),
(c)
2 DUs housed in racks on the center instrument panel (EWD DU and SD DU),
(d)
3 DMCs located in the avionics compartment,
(e)
1 source SWITCHING panel, located on the center pedestal, next to the ECAM CONTROL panel for reconfiguration purpose in case of:
-reconfiguration control in case of DMC failure
-ECAM/ND transfer in case of EWD DU or SD DU failure. (Ref. Fig. 004, 005, 006)
(f) 3 control knobs, located on either side of the glareshield (extremely left and right) for:
-PFD/ND transfer in case of PFD DU failure,
-
the PFD brightness control,
-
the ND brightness control.
(g)
2 EFIS control panels (L and R part of the FCU), including the controls associated with the CAPT and the F/O PFD and ND,
(h)
The ECAM CONTROL Panel located on the pedestal including:
-
the UPPER Display controls such as CLR, STS, UPPER DISPLAY brightnes control potentiometer
-
the LOWER Display controls such as ENG, BLEED, PRESS... Pages, LOWER DISPLAY brightness control potentiometer.
NOTE : The potentiometer associated to each DU enables the crew
____ to switch on/off the related DU and to globally adjust the brightness. The ND outer potentiometer is dedicated to the brightness adjustment of the weather radar image.
R 1EFF : 401-499, 1 31-60-00Page 8 1 1 Config-2 Aug 01/05 1 1 1CES 1
EIS - Components located in the cockpit
Figure 004
R 1EFF : 401-499, 1 31-60-00Page 9 1 1 Config-2 Aug 01/05 1 1 1CES 1
EFIS and source switching panel location
Figure 005
R 1EFF : 401-499, 1 31-60-00Page 10 1 1 Config-2 Aug 01/05 1 1 1CES 1
EIS Components - Avionics Compartment
Figure 006
R 1EFF : 401-499, 1 31-60-00Page 11 1 1 Config-2 Aug 01/05 1 1 1CES 1
B. Components Associated with the Electronic Instrument System (EIS)
(1) The components associated with the EIS are:
-
The Flight Control Unit (FCU) which includes the CAPT EFIS control panel and the F/O EFIS control panel. The FCU is part of the Automatic Flight System (AFS). (For further details, Ref. to 22-81-00).
-
The ECAM control panel which includes the controls for system page selection as well as the UPPER DISPLAY and LOWER DISPLAY control/brightness potentiometers. The ECAM Control Panel is part of the Flight Warning System. (For further details, Ref. to 31-50-00).
R 1EFF : 401-499, 1 31-60-00Page 12 1 1 Config-2 Aug 01/05 1 1 1CES 1
C. EIS Components (List/Location)
(1) The following table gives the EIS components:
-------------------------------------------------------------------------------FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA | | | | DOOR | REF. -------------------------------------------------------------------------------
1WT1 DMC-1 85VU 127 31-63-34
1WT2 DMC-2 86VU 128 31-63-34
1WT3 DMC-3 85VU 127 31-63-34
2WT1 PFD-CAPT 3VU 211 31-63-22
2WT2 PFD-F/O 5VU 212 31-63-22
3WT1 ND-CAPT 3VU 211 31-63-22
3WT2 ND-F/O 5VU 212 31-63-22
4WT1 DU-ECAM, UPPER 4VU 210 31-63-22
4WT2 DU-ECAM, LOWER 4VU 210 31-63-22
7WT1 POT-PFD, CAPT 301VU 211 31-61-00
7WT2 POT-PFD, F/O 500VU 212 31-61-00
8WT1 POT-ND, CAPT 301VU 211 31-61-00
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 指示/記錄系統 7(29)
