R 1EFF : 401-499, 1 31-60-00Page 307 1 1 Aug 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
-press the line key adjacent to
 RETURN to get back to the main
 menu page

 NOTE : If the result of the test
____
 gives the amber message
 PFD F/O (ND F/O) XLOAD
 ABORTED, then try again
 once from step 1. If the
 new result is XLOAD
 ABORTED, remove the PFD DU
 (the ND DU) and return it
 to the shop for repair.

 5. Close-up________
 Subtask 31-60-00-860-086
 A. Put the aircraft back to its initial configuration.
 (1)
 Do the EIS stop procedure (Ref. TASK 31-60-00-860-002).

 (2)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (3)
 De-energize the aircraft electrical circuits
 (Ref. TASK 24-41-00-862-002).

R 1EFF : 401-499, 1 31-60-00Page 308 1 1 Aug 01/05 1 1 1CES 1 TASK 31-60-00-610-008

 1. Reason for the Job
 XLOADING Procedure of the DMC3 to the PFD CAPT, ND CAPT, the EWD or the SD __________________ Self Explanatory
 2. Job Set-up Information______________________
 A. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
24-41-00-861-002  Energize the Aircraft Electrical Circuits from the External Power
 24-41-00-862-002  De-energize the Aircraft Electrical Circuits Supplied from the External Power
 31-32-00-860-008  Procedure to Get Access to the SYSTEM
 REPORT/TEST/INST Page 31-60-00-860-001 EIS Start Procedure 31-60-00-860-002 EIS Stop Procedure
 3. Job Set-up
__________ Subtask 31-60-00-869-071
 A. Aircraft Maintenance Configuration
 (1)
 Energize the aircraft electrical circuits
 (Ref. TASK 24-41-00-861-002)

 (2)
 Do the EIS start procedure (Ref. TASK 31-60-00-860-001)

 (3)
 On one MCDU, get the SYSTEM REPORT/TEST INST menu page (Ref. TASK 31-32-00-860-008)

 (4)
 On the switching panel 8VU, put the EIS DMC selector switch to CAPT

 3.
R 1EFF : 401-499, 1 31-60-00Page 309 1 1 Aug 01/05 1 1 1CES 1 Subtask 31-60-00-865-067

 B. Make sure that this(these) circuit breaker(s) is(are) closed:
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU EIS/ECAM/CTL/PNL 15WT E12 49VU EIS/DMC1/SPLY 10WT1 E11 49VU EIS/DMC3/STBY/SPLY 14WT1 E10 49VU EIS/DMC1/SWTG 21WT1 E09 49VU EIS/DMC3/SWTG 21WT3 E07 121VU EIS/DMC3/SPLY 10WT3 Q09 121VU EIS/DMC2/SPLY 10WT2 Q08 121VU EIS/DMC2/SWTG 21WT2 R08
 4. Procedure
_________
 Subtask 31-60-00-610-058
 A. Crossloading of the DMC3 date to CAPT PFD, CAPT ND, EWD or SD
 NOTE : The procedure is for the CAPT PFD. For the CAPT ND, the ECAM SD or
____
 EWD, use the indication between parentheses.

 NOTE : Crossloading is possible only if the target DUs (DUs to which you
____ crossload data) have an EIS software PN different than that of the source DMC. You can crossload data to all the DUs at the same time.
 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the MCDU::
-press the line key adjacent to the EIS3 indication
2. On the MCDU:
-press the line key adjacent to the PIN PROG/STATUS AND X LOAD indication
On the MCDU:
-
the DMC3 main menu page comes intoview. On the PFD CAPT,CAPT ND, EWD and SD Display Units:

 -
the green MAINTENANCE MODE message comes into view.

On the MCDU:

-
the page DMC3 PIN PROG STATUS AND XLOAD comes into view

R 1EFF : 401-499, 1 31-60-00Page 310 1 1 Aug 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
3. On the MCDU:
-press the line key adjacent to the DU X LOAD indication
4. On the MCDU:
-press the line key adjacent to ACCESS X LOAD
5.
 On the MCDU:

- obey the instructions refered to as: INITIAL CONDITIONS and press the line key adjacent to START X LOAD
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 指示/記錄系統 7(68)