曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 49VU EIS/DMC3/STBY/SPLY  14WT1  E10
 49VU EIS/DMC1/SWTG  21WT1  E09
 49VU EIS/DMC3/SWTG  21WT3  E07
 49VU EIS/ECAM DU/UPPER/SWTG  24WT1  E06
 49VU EIS/ECAM DU/UPPER/SPLY  13WT1  E05
 49VU EIS/PFD CAPT/SWTG  22WT1  E04
 49VU EIS/PFD/CAPT/SPLY  11WT1  E03
 49VU EIS/ND CAPT/SWTG  23WT1  E02
 49VU EIS/ND CAPT/SPLY  12WT1  E01
 121VU EIS/DMC3/SPLY  10WT3  Q09
 121VU EIS/DMC2/SPLY  10WT2  Q08
 121VU EIS/ECAM DU/LOWER/SPLY  13WT2  R11
 121VU EIS/ECAM DU/LOWER/SWTG  24WT2  R10
 121VU EIS/DMC2/SWTG  21WT2  R08
 121VU EIS/ND/F/O/SWTG  23WT2  R06
 121VU EIS/PFD/F/O/SWTG  22WT2  R05
 121VU EIS/ND/F/O  12WT2  R04
 121VU EIS/PFD/F/O  11WT2  R03
 122VU ELEC/AC/BUS1/CTL  17XN1  V25
 Subtask 31-60-00-869-073
 C. On the panels 301VU and 500VU and on the ECAM control panel:
 - set all of the potentiometers to the center position.
 4. Procedure_________
 Subtask 31-60-00-710-059
 A. Automatic PFD/ND Transfer
 NOTE : This test is for the CAPT side. For the F/O side, use the____
 indications between parentheses. 

R 1EFF : 401-499, 1 31-60-00Page 519 1 1 Aug 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
1. On the panel 301VU (500VU):
 -
set the PFD potentiometer to OFF.

-
set the PFD potentiometer to the center position.

Subtask 31-60-00-710-060
 B. Manual PFD/ND Transfer
-the PFD is stopped and the PFD imagemoves to the ND.
-SELF TEST IN PROGRESS (MAX 40SECONDS) comes into view, then the ND image comes back on the PFD.
 NOTE : This test is for to the CAPT side. For the F/O side, use the
____
 indications between parentheses.

 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the panel 301VU (500VU):
 -
push then release the PFD/ND/XFR pushbutton switch.

-
push then release the PFD/ND/XFR pushbutton switch.

- on the PFD:
* the ND image comes into view. - on the ND:
 * the PFD image comes into view.
-the PFD and ND images go to theirinitial position.
R 1EFF : 401-499, 1 31-60-00Page 520 1 1 Aug 01/05 1 1 1CES 1 Subtask 31-60-00-710-061

 C. Manual ECAM/ND Transfer
 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the center pedestal, on the
 SWITCHING panel 8VU:
 - set the ECAM/ND/XFR selector  - on the lower ECAM DU:
 switch to CAPT.  * Message ECAM on ND, the system page
 comes into view on the CAPT ND.
 - set the ECAM/ND/XFR selector  - on the lower ECAM DU:
 switch to F/O.  * message ECAM on ND and the system
 page comes into view on the F/O ND.
 - set the ECAM/ND/XFR selector  - the DUs go to their initial
 switch to NORM.  configuration.
 Subtask 31-60-00-710-062

 D. Manual DMC 1 and 2 to DMC 3 Switching
 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1.
 On the overhead C/B panel 49VU: - open the circuit breaker 10WT1.

2.
 On the center pedestal, on the SWITCHING panel 8VU:

 -set the EIS DMC selector switch to CAPT/3.
3. On the panel 301VU:
-INVALID DATA message comes into view on the CAPT PFD and ND. - on the ENGINE WARNING image EIS DMC 1
 FAULT message is displayed - on the glareshield:
 * the MASTER CAUT lights come on.
 -you can hear the single chime.
-INVALID DATA message goes out of viewand the DUs show their initial image.
R 1EFF : 401-499, 1 31-60-00Page 521 1 1 Aug 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
- push and release the PFD/ND/XFR  - on the PFD and the ND, the images
 pushbutton switch.  change of position.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 指示/記錄系統 7(82)