(b) Removal of the fitting (56) including the locking pin. 1 Remove the bolts (57) and (54) and the washers (55).
_
 2 Disengage the fitting (56) from and the locking pin.

_

 (c) Disassembly of the locking pin. 1 Remove the bolt (24), the adjustable washers (25), the caps
_
 (26) (27) and (28) and the adjustable washer (29). 2 Remove the locking pin (30) from the fitting (56).
_
 (d) Disconnect the rod (33). 1 Remove the cotter pin (37) and discard it.
_
 2 Remove the nut (36) and the washer (35).

_
 3 Remove the bolt (31) the washer (32) and the bushes (34) and

_ (39).
 4 Remove the locking pin (30).
_
 (e) Remove the sealant from the fitting (56), the door structure, the thread of the bolt (24) with CLEANING AGENTS (Material No. 11-004) and MISCELLANEOUS (Material No. 19-003).
 Subtask 52-13-21-020-057
 G. Removal of the Locking Shaft Mechanism (Ref. Fig. 407/TASK 52-13-21-991-014)
 (1)
 Close the door.

 (2)
 Remove the plate (113).

 (a)
 Remove the nuts (116), the bolts (114) and the set of washers (115).

 (b)
 Remove the set of washers (112) and the plate (113).

 1EFF : ALL 1 52-13-21Page 417 1 1 May 01/98R 1 1 1CES 1

 Locking Shaft Mechanism
 Figure 407/TASK 52-13-21-991-014- 12 (SHEET 1)
 1EFF :  ALL  1  52-13-21 Page 418 
1  1  Feb 01/98
 1  1
 1CES  1

 Locking Shaft Mechanism
 Figure 407/TASK 52-13-21-991-014- 22 (SHEET 2)
 1EFF :  ALL  1  52-13-21 Page 419 
1  1  Feb 01/98
 1  1
 1CES  1

 (3)
 Disconnect the rods (67).

 (a)
 Remove the cotter pin (63) and discard it.

 (b)
 Remove the nut (62), the washer (64).

 (c)
 Remove the bolt (90) the washer (66) and the bushes (61) and (65).

 (d)
 Disconnect the rod (67).

 (4)
 Disconnect the rod (87).

 (a)
 Remove the cotter pin (85) and discard it.

 (b)
 Remove the nut (84) the washer (86).

 (c)
 Remove the bolt (89) and the bush (88).

 (d)
 Disconnect the rod (87).

 (5)
 Disconnect the rod (75).

 (a)
 Release the rod (75) (Ref. Fig. 408/TASK 52-13-21-991-015)

 (b)
 Remove the cotter pin (68) and discard it.

 (c)
 Remove the nut (69) and the washer (70).

 (d)
 Remove the bolt (74) the washer (73) and the bushes (71) and (72).

 (e)
 Disconnect the rod (75).

 1_ Remove and discard the lockwire from the nuts (139).
 2_ Loosen the nuts (139) and release the lockwashers (140).
 3_ Loosen the clamp (147).
 4_ Turn the barrel of the rod (75) to retract the hook (138) so
 that it does not touch the roller (137).

 1EFF : ALL 1 52-13-21Page 420 1 1 May 01/98R 1 1 1CES 1

 (6)
 Disconnect the rod (80).

 (a)
 Remove the cotter pin (76) and discard it.

 (b)
 Remove the nut (77) and the washer (78).

 (c)
 Remove the bolt (83) the washer (82) and the bushes (81) and (79).

 (d)
 Disconnect the rod (80).

 (7)
 Disconnect the rod (92).

 (a)
 Remove the cotter pin (96) and discard it.

 (b)
 Remove the nut (97) and the washer (95).

 (c)
 Remove the bolt (94), and the bushes (93) and (98).

 (d)
 Disconnect the rod (92).

 (8)
 Disassembly of the locking shaft

 (a)
 Remove the lever assy (104).

 (b)
 Remove the cotter pin (106), and discard it.

 (c)
 Remove the nut (107) the washer (108).

 (d)
 Push the shaft (117).

 (e)
 Remove the bush (128).

 (f)
 Remove the lever assembly (127) and (129) and the bush (130) and the lever assembly (101).

 (g)
 Remove the bush (126).

 (h)
 Remove the bellcranck assembly (125).

 (i)
 Remove the spacer (124).

 (j)
 Remove the lever assembly (122) and the bellcranck assy (123).

 (k)
 Remove the bush (121) and the washer (120) and remove the shaft (117).
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門2(115)