(4)
 Remove the screw (86).

 (5)
 Loosen and remove the screws (84).

 (6)
 Remove the nuts (81).

 1EFF : ALL 1 52-11-31Page 419 1 1 May 01/04R 1 1 1CES 1

 Roller Figure 406/TASK 52-11-31-991-007
 1EFF : 1 1R 1CES  ALL  1 11 1 52-11-31 Page 420 Feb 01/02

 Door Stop Fittings Figure 407/TASK 52-11-31-991-008
 1EFF : 1 1R 1CES  ALL  1 11 1 52-11-31 Page 421 May 01/98

 Subtask 52-11-31-020-056
 F. Removal of the Roller
 (Ref. Fig. 408/TASK 52-11-31-991-009)

 (1)
 Loosen the nuts (91) and remove them.

 (2)
 Remove the bolts (92).

 (3)
 Remove the roller (90) from the door.

 (4)
 Disassemble the roller (90) as follows:

 (a)
 Remove the cotter pin (93) and discard it.

 (b)
 Loosen the nut (94) and remove it.

 (c)
 Remove the washer (95).

 (d)
 Remove the bolt (96), the roller assembly (97), the spacer (98) and the fitting (90).

 Subtask 52-11-31-020-057
 G. Removal of the Fittings of the Guide Arms
 (Ref. Fig. 409/TASK 52-11-31-991-010)

 (1)
 Disengage the guide arms (100) and (101) (Ref. TASK 52-11-12-000-003).

 (2)
 Loosen the nuts (102) and remove them.

 (3)
 Remove the bolts (106) and the washers (103).

 (4)
 Remove the fitting pivots (105) and (108).

 (5)
 Remove the serrated plates (107) (104).

 1EFF : ALL 1 52-11-31Page 422 1 1 Feb 01/02R 1 1 1CES 1

 Roller Fitting Figure 408/TASK 52-11-31-991-009
 1EFF : 1 1R 1CES  ALL  1 11 1 52-11-31 Page 423 Feb 01/02

 Fittings of the Guide Arms Figure 409/TASK 52-11-31-991-010
 1EFF : 1 1R 1CES  ALL  1 11 1 52-11-31 Page 424 May 01/98

 TASK 52-11-31-400-002
 Installation of the Stop Fittings, the Buffer, the Guide Fittings, the Rollers, the Door Stop Fittings, the Roller Fittings and the Guide Arm Fittings
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE  QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific  access platform 3.5 m (11 ft. 6 in.)
R No specific  Torque Wrench : range 0.00 to 1.20 m.daN
R (0.00 to 9.00 lbf.ft) No specific Torque Wrench : range 0.20 to 3.60 m.daN
 (2.00 to 26.00 lbf.ft)
 B. Consumable Materials
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
Material No. 05-047  C Z-11.904
 ANTI COR. COMPOUND(HIGH TEMP.SILICONE SEALANT)
 (Ref. 20-31-00)

 Material No. 09-005  USA MIL-S-81733 CLASS C CORROSION INHIBITIVE INTERFAY SEALANT (Ref. 20-31-00)
 Material No. 11-004  USA MIL-T-81533
 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
 (Ref. 20-31-00)

 Material No. 19-003  USA AMS 3819
 LINT-FREE COTTON CLOTH (Ref. 20-31-00)

 C. Expendable Parts
 -------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION  |IPC-CSN
 -------------------------------------------------------------------------------
71 cotter pin 52-11-11 21 -100 71 cotter pin 52-11-11 21A-100 83 lock plate 52-11-11 21 -040 83 lock plate 52-11-11 21A-040 93 cotter pin 52-11-11 21 -100 93 cotter pin 52-11-11 21A-100
 1EFF : ALL 1 52-11-31Page 425 1 1 May 01/05 1 1 1CES 1 D. Referenced Information

 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-23-45-400-006 Installation of the Door Frame Linings at the Left FWD Passenger/Crew Door 25-23-45-400-007 Installation of the Door Frame Linings at the Right FWD Passenger/Crew Door 25-23-46-400-001 Installation of the Door Linings at the FWD Passenger/Crew Doors R 25-62-44-400-001 Installation of the Escape-Slide Pack-Assembly 52-10-00-080-001 Removal of the Passenger/Crew Door Ballast Weight (98D52103501000) for Escape Slide 52-10-00-080-001 Removal of the Passenger/Crew Door Ballast Weight
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門2(39)