R  4. Procedure_________ 
R  Subtask 52-13-00-210-054 
R  A. Inspection 
R  (Ref. Fig. 602/TASK 52-13-00-991-023) 
R  (1) Do a visual inspection of the door stop assemblies of the aft left 
R  and right passenger/crew doors. 
R  (2) Make sure that there is no: 
R  (a) Corrosion damage 
R  - If you find corrosion damage, refer to the Stuctural Repair 
R  Manual (Ref. SRM 512200 P.Block 001) for types, inspection, 
R  removal and corrosion protection. 
R  (b) Other damage (cracks, scratches, stress, marks, dents, 
R  bumps,...): 
R  - If you find other damage, refer to the Structural Repair Manual 
R  (Ref. SRM 511100 P.Block 001) for damage classification and 
R  corrective action. 
R  5. Close-up________ 
R  Subtask 52-13-00-410-063 
R  A. Close Access 
R  (1) Obey the special precautions after the work on the door (Ref. TASK 
R  52-10-00-860-002). 
R  (2) Close the aft passenger/crew door 832 (842), (Ref. TASK 52-10-00-410-
R  001). 
R  (3) Make sure that the work area is clean and clear of tool(s) and other 
R  items. 
R  (4) Remove the access platform(s).

R R  Aft Passenger/Crew Doors - Door Stop Assemblies Figure 602/TASK 52-13-00-991-023
 1EFF : 1 1 1CES  ALL  1 111 52-13-00 Page 608 May 01/03

R  TASK 52-13-00-210-002 
R  General Visual Inspection of Aft Passenger/Crew Door Skin, External Surface, 
R  LH/RH 
R  1. Reason for the Job__________________ 
R  Refer to the MPD TASK: 521303-01 
R  2. Job Set-up Information______________________ 
R  A. Fixtures, Tools, Test and Support Equipment 
R  -------------------------------------------------------------------------------
R  REFERENCE QTY DESIGNATION 
R  -------------------------------------------------------------------------------
R  No specific access platform 3.5 m (11 ft. 6 in.) 
R  B. Consumable Materials 
R  -------------------------------------------------------------------------------
R  REFERENCE DESIGNATION 
R  -------------------------------------------------------------------------------
R  Material No. 11-004 USA MIL-T-81533 
R  1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) 
R  (Ref. 20-31-00) 
R  Material No. 19-003 USA AMS 3819 
R  LINT-FREE COTTON CLOTH (Ref. 20-31-00) 
R  C. Referenced Information 
R  -------------------------------------------------------------------------------
R  REFERENCE DESIGNATION 
R  -------------------------------------------------------------------------------
R  SRM 511100 P.Block 001 (for corrective action) 
R  SRM 512200 P.Block 001 (for corrective action) 
R  52-13-00-991-022 Fig. 603

 1EFF : ALL 1 52-13-00Page 609 1 1 May 01/03 1 1 1CES 1 1EFF : ALL 1 52-13-00Page 610 1 1 May 01/03 1 1 1CES 1

R  3. Job Set-up__________ 
R  Subtask 52-13-00-010-063 
R  A. Get Access 
R  (1) Put an access platform in position : 
R  (a) For the left passenger/crew door at the zone 832. 
R  (b) For the right passenger/crew door at the zone 842. 
R  Subtask 52-13-00-110-052 
R  B. Cleaning of the Structure 
R  WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ 
R  MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. 
R  OBEY THE MANUFACTURERS INSTRUCTIONS. 
R  PUT ON PROTECTIVE CLOTHING. 
R  DO NOT GET THEM IN YOUR MOUTH. 
R  DO NOT SMOKE. 
R  DO NOT BREATHE THE GAS. 
R  THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. 
R  GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED. 
R  WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE_______ 
R  MATERIAL/S. 
R  USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK. 
R  (1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) 
R  and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if 
R  necessary. 
R  4. Procedure_________ 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門2(73)