R Door Stop Fittings Figure 601/TASK 52-13-00-991-009
1EFF : 1 1 1CES ALL 1 111 52-13-00 Page 603 May 01/02
5. Close-up
________ Subtask 52-13-00-410-058
A. Close Access
(1)
Obey the special precautions after the work on the door. (Ref. TASK 52-10-00-860-002)
(2)
Close the applicable aft passenger/crew door (Ref. TASK 52-10-00-410-001).
(3)
Make sure that the work area is clean and clear of tool(s) and other items.
(4)
Remove the access platform(s).
1EFF : ALL 1 52-13-00Page 604 1 1 May 01/02R 1 1 1CES 1
R TASK 52-13-00-210-001
R General Visual Inspection of Door Stop Assemblies on Aft Passenger/Crew Door, R LH/RH R 1. Reason for the Job
__________________ R Refer to the MPD TASK: 521301-02 R 2. Job Set-up Information
______________________
R A. Fixtures, Tools, Test and Support Equipment
R -------------------------------------------------------------------------------R REFERENCE QTY DESIGNATION
R -------------------------------------------------------------------------------
R No specific access platform 3.5 m (11 ft. 6 in.)
R B. Consumable Materials
R -------------------------------------------------------------------------------R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R Material No. 11-004 USA MIL-T-81533
R 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
R (Ref. 20-31-00)
R Material No. 19-003 USA AMS 3819
R LINT-FREE COTTON CLOTH (Ref. 20-31-00)
R C. Referenced Information
R -------------------------------------------------------------------------------R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R 52-10-00-010-001 R 52-10-00-410-001 R 52-10-00-860-001 R R 52-10-00-860-002 R R SRM 511100 P.Block 001 R SRM 512200 P.Block 001 R 52-13-00-991-023 Opening of the Passenger/Crew Door Closing of the Passenger/Crew Door Special Precautions before Work on the Passenger/Crew Door Special Precautions after Work on the Passenger/Crew Door (for corrective action) (for corrective action) Fig. 602
1EFF : ALL 1 52-13-00Page 605 1 1 May 01/03 1 1 1CES 1 1EFF : ALL 1 52-13-00Page 606 1 1 May 01/03 1 1 1CES 1 1EFF : ALL 1 52-13-00Page 607 1 1 May 01/03 1 1 1CES 1
R 3. Job Set-up__________
R Subtask 52-13-00-010-062
R A. Get Access
R (1) Put an access platform in position :
R (a) For the left passenger/crew door at the zone 832.
R (b) For the right passenger/crew door at the zone 842.
R (2) Open the aft passenger/crew door 832 (842), (Ref. TASK 52-10-00-010-
R 001).
R (3) Obey the special precautions before you start the work on the door
R (Ref. TASK 52-10-00-860-001).
R Subtask 52-13-00-110-053
R B. Cleaning of the Structure
R WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______
R MATERIALS ONLY WITH A GOOD SUPPLY OF AIR.
R OBEY THE MANUFACTURERS INSTRUCTIONS.
R PUT ON PROTECTIVE CLOTHING.
R DO NOT GET THEM IN YOUR MOUTH.
R DO NOT SMOKE.
R DO NOT BREATHE THE GAS.
R THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT.
R GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
R WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE_______
R MATERIAL/S.
R USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.
R (1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004)
R and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門2(72)
