(2)
Remove the access platform(s).
(3)
Fully retract the slats (Ref. TASK 27-80-00-866-005).
1EFF : ALL 1 57-43-00Page 620 1 1 May 01/05R 1 1 1CES 1
R Details of the Roller Contact Area of Slat Track 5 and 6 Figure 604/TASK 57-43-00-991-008
1EFF : ALL 1 57-43-00Page 621 1 1 Aug 01/00 1 1 1CES 1 Subtask 57-43-00-942-063
C. Removal of Equipment
(1)
Remove the warning notice(s).
(2)
Remove the safety barriers.
(3)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
1EFF : ALL 1 57-43-00Page 622 1 1 Feb 01/99R 1 1 1CES 1
TASK 57-43-00-200-008
R Detailed Inspection of Slat 2, Tracks 5 and 6 Attachments, including Track Rib Lugs, Track Lugs, Bolts, Links and Side Plates LH/RH
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
GEAR.
1. Reason for the Job
__________________
Refer to the MPD TASK: 574302-01
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific safety barriers
No specific warning notices
No specific adjustable access platform 3.5 m (11 ft. 6 in.)
98D27803000000 1 LOCKING TOOL - FLAP/SLAT CONTROL LEVER
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-026 GB DEF-STAN 68-148/1
SOLVENT GENERAL PURPOSE (Ref. 20-31-00)
Material No. 19-003 USA AMS 3819
LINT-FREE COTTON CLOTH (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
27-80-00-866-004 Extending the Slats on the Ground
27-80-00-866-005 Retracting the Slats on the Ground
R 27-84-64-000-001 Removal of the No. 2 Slat
R 27-84-64-400-002 Installation of the No. 2 Slat ASRM 574000 (for corrective action) 57-43-00-991-006 Fig. 605 57-43-00-991-007 Fig. 606 57-43-00-991-009 Fig. 607 57-43-00-991-010 Fig. 608
3. Job Set-up
__________
Subtask 57-43-00-941-057
A. Safety Precautions
(1)
Put warning notices in the cockpit to tell persons not to operate the flaps or slats.
(2)
Put the safety barriers in position.
Subtask 57-43-00-860-058
B. Aircraft Maintenance Configuration
(1)
Fully extend the slats (Ref. TASK 27-80-00-866-004).
(2)
Make sure that the LOCKING TOOL - FLAP/SLAT CONTROL LEVER is installed on the flap/slat control lever.
Subtask 57-43-00-865-064
C. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU FLIGHT CONTROLS/SLT/CTL AND MONG/SYS1 5CV B06 121VU FLIGHT CONTROLS/SLT/CTL/SYS2 7CV R21
Subtask 57-43-00-010-056
D. Get Access
(1) Put the adjustable access platform in position below the applicable wing leading edge at slat 2, zone 522(622).
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINGS 機翼3(39)
