-
the adjacent area(s) (1) and (2).

R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 57-51-00Page 609 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1 Subtask 57-51-00-280-052

 B. Inspection
 (1) Do a special detailed inspection of the areas at point 'Y' of the spoilers 2 thru 4 actuator and hinge fittings (Ref. NTM 57-51-30 PART 6).
 NOTE : If necessary, refer to the ASRM (Ref. ASRM 575100) for the
____ correct repair procedure. If the defect is not included in this repair, you must request a procedure from Airbus Industrie. ________
5. Close-up
 Subtask 57-51-00-865-051
 A. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 5CV, 6CV, 7CV, 8CV, 21CE1, 21CE2, 21CE3, 22CE.
 Subtask 57-51-00-860-053
 B. Aircraft Maintenance Configuration
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Remove the LOCKING TOOL - FLAP/SLAT CONTROL LEVER from the flap/slat control lever.

 (3)
 Retract the flaps (Ref. TASK 27-50-00-866-009).

 (4) Retract the spoilers (Ref. TASK 27-60-00-866-002). Subtask 57-51-00-942-050
 C. Removal of Equipment
 (1)
 Remove the access platform(s).

 (2)
 Remove the warning notice(s).

 (3)
 Remove the safety barriers.

 (4)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 57-51-00Page 610 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1R **ON A/C ALL

 TASK 57-51-00-210-001
 Detailed Visual Inspection of Outer Wing Trailing Edge Spoilers 1, 2, 3, 4 and 5 Hinge Pins
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
 GEAR.

 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
 START A TASK ON OR NEAR:

 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING EDGE:
_______
 -
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS.

 -
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS.

 -MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.
 1. Reason for the Job

__________________
 Refer to the MPD TASK: 575106-01
 NOTE : This Task is an alternative to the Task 575100-220-015.
____
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific safety barriers
 No specific warning notices
 No specific adjustable access platform 4 m (13 ft. 1 in.)
 98D27803500001 1 TOOL-ZERO LOCKING, FLAP SLAT CTL LEVER

 INTENTIONALLY BLANK

R 1 1
57-51-00Page 612
1 1 May 01/04 1 1 1CES 1

 B. Consumable Materials
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
Material No. 11-026 GB DEF-STAN 68-148/1
 SOLVENT GENERAL PURPOSE (Ref. 20-31-00)
 Material No. 19-003 USA AMS 3819
 LINT-FREE COTTON CLOTH (Ref. 20-31-00)

 C. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
27-64-41-000-001 Removal of the Spoiler 1
 27-64-41-400-001 Installation of the Spoiler 1
 27-64-42-000-001 Removal of the Spoiler 2
 27-64-42-400-001 Installation of the Spoiler 2
 27-64-43-000-001 Removal of the Spoiler 3
 27-64-43-400-001 Installation of the Spoiler 3
 27-64-44-000-001 Removal of the Spoiler 4
 27-64-44-400-001 Installation of the Spoiler 4
 27-64-45-000-001 Removal of the Spoiler 5
 27-64-45-400-001 Installation of the Spoiler 5

R 57-51-37-000-002 Removal of the Access Panels 573AB(673AB),
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊 AMM WINGS 機(jī)翼3(83)