(c)  
Turn the rudder pedal adjustment to move the rudder pedals full forward.

 (d)  
Do these steps to set the pedal to the middle position: 1) Turn the rudder pedal adjustment crank to move the rudder pedals full aft. Keep a record of the number of turns.

 2)  Turn the rudder pedal adjustment crank half the recorded number of turns forward. Mark this position as position 1 at the pedal pivot points on both the left and right pedals.

 (e)  
Turn the rudder pedal adjustment to move the rudder pedals full forward.

 (f)  
Move the captain's left pedal forward until it touches the stop and hold. Mark this position as position 2 at the pedal pivot point . 1) Measure the forward travel of the left pedal from position

 1 to position 2. 2) Make sure the forward travel is at a minimum of 6.86 inches. 3) Release the captain's left pedal.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-21-00
 ALL  ú ú 02 Page 514 ú Jul 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
 (g)

(h)

(i)

(j)

(k)

(l)

(m)

(n)

(o)

A
737-300/400/500MAINTENANCE MANUAL
Move the captain's right pedal forward until it touches the stop and hold. Mark this position as position 2 at the pedal pivot point . 1) Measure the forward travel of the right pedal from position
 1 to position 2. 2) Make sure the forward travel is at a minimum of 6.86
 inches. 3) Release the captain's right pedal.Move the captain's pedal adjustment to the full aft position.Move the captain's left pedal forward until it touches the stop and hold. Mark the right pedal aft position as position 3 at the pedal pivot point . 1) Measure the aft travel of the right pedal from position 1
 to position 3. 2) Make sure the aft travel is at a minimum of 6.89 inches. 3) Release the captain's left pedal.Move the captain's right pedal forward until it touches the stop and hold. Mark the left pedal aft position as position 3 at the pedal pivot point. 1) Measure the aft travel of the left pedal from position 1 to
 position 3. 2) Make sure the aft travel is at a minimum of 6.89 inches. 3) Release the captain's right pedal.Move the first officer's pedal adjustment to the full forward.Do these step to set the pedal to the middle position: 1) Move the first officer's pedal adjustment to the full aft.
 Keep a record of the number of turns.
 2)  Turn the rudder pedal adjustment crank half the recorded number of turns forward. Mark this position as position 1 at the pedal pivot points on both the left and right pedals.
Turn the rudder pedal adjustment to move the rudder pedals full forward.Move the first officer's left pedal forward until it touches the stop and hold. Mark this position as position 2 at the pedal pivot point. 1) Measure the forward travel of the left pedal from position
 1 to position 2. 2) Make sure the forward travel is at a minimum of 6.86
 inches. 3) Release the first officer's left pedal.Move the first officer's right pedal forward until it touches the stop and hold. Mark this position as position 2 at the pedal pivot point. 1) Measure the forward travel of the right pedal from position
 1 to position 2. 2) Make sure the forward travel is at a minimum of 6.86 inches.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-21-00
 ALL  ú ú 02 Page 515 ú Jul 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
HORIZONTAL ANGLE FROM  MULTIPLY FORCE BY:  HORIZONTAL ANGLE FROM  MULTIPLY FORCE BY: 
0` 5` 10` 15` 20`  1.0 1.0 0.98 0.97 0.94  25` 30` 35` 40` 45`  0.91 0.87 0.82 0.77 0.71 

Rudder Pedal Force Checking Tool
Figure 506

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-21-00
 ALL  ú ú 01 Page 516 ú Nov 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 2(22)