Rudder Wear Limits
Figure 601 (Sheet 4)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-21-11
ALL ú ú 02 Page 605 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
INDEX NO. PART NAME DIM. DESIGN LIMITS WEAR LIMITS REPLACE PART WORN REPAIR WORN PART INSTR REPAIR
DIAMETER DIM. WEAR PER-MITTED CLEAR-ANCE DIA MAX
MIN MAX
25 BUSHING (HINGE 5) ID 0.4375 0.4395 0.4414 0.0045 X
BUSHING (HINGE 5) OD 0.4365 0.4370 0.4353 X
26 BUSHING (HINGE 5) ID 0.3125 0.3130 0.3149 0.0045 X
BOLT (HINGE 5) OD 0.3110 0.3120 0.3070
27 BUSHING (HINGE 5) ID 0.4380 0.4385 0.4411 0.0045
BUSHING (HINGE 5) OD 0.4365 0.4370 0.4360 X
28 BUSHING (HINGE 5) ID 0.3125 0.3135 0.3149 0.0045 X
BOLT (HINGE 5) OD 0.3110 0.3120 0.3070
29 BUSHING (HINGE 6) ID 0.4375 0.4395 0.4414 0.0045 X
BUSHING (HINGE 6) OD 0.4365 0.4370 0.4353 X
30 BUSHING (HINGE 6) ID 0.3125 0.3130 0.3149 0.0045 X
BOLT (HINGE 6) OD 0.3110 0.3120 0.3070
31 BUSHING (HINGE 6) ID 0.4380 0.4385 0.4411 0.0045
BUSHING (HINGE 6) OD 0.4365 0.4370 0.4360 X
32 BUSHING (HINGE 6) ID 0.3125 0.3135 0.3149 0.0045 X
BOLT (HINGE 6) OD 0.3110 0.3120 0.3070
33 BUSHING (HINGE 7) ID 0.3750 0.3790 0.3808 0.0060 X
BUSHING (HINGE 7) OD 0.3740 0.3745 0.3729 X
34 BUSHING (HINGE 7) ID 0.2500 0.2505 0.2525 0.0040 X
BOLT (HINGE 7) OD 0.2485 0.2495 0.2480
35 BUSHING (HINGE 7) ID 0.3755 0.3760 0.3784 0.0045
BUSHING (HINGE 7) OD 0.3740 0.3745 0.3735 X
36 BUSHING (HINGE 7) ID 0.2500 0.2540 0.2560 0.0080 X
BOLT (HINGE 7) OD 0.2485 0.2495 0.2480
CHROME PLATE THICKNESS 0.0030 INCH THE SUM OF THE TWO IS NOT TO BE MORE THAN 0.0060 INCH
Rudder Wear Limits
Figure 601 (Sheet 5)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-21-11
ALL ú ú 01 Page 606 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
RUDDER - REMOVAL/INSTALLATION
_____________________________
1. General_______
A. This procedure contains the removal task for a graphite or aluminum rudder and the installation task for an aluminum rudder.
TASK 27-21-12-004-042
2. Remove the Graphite or Aluminum Rudder______________________________________
A. Special Tools and Equipment
(1)
F80025-1, Rudder Sling Assembly
B.
References
(1)
27-21-11/401, Rudder
C.
Access
(1)
Location Zones
708 Rudder
(2)
Access Panels
9512L TE Access Panel - Rudder
9514R TE Access Panel - Rudder
9515L TE Access Panel - Rudder
D.
Procedure
S 024-001
(1) Remove the rudder and keep all the hardware for installation (Ref 27-21-11/401).
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 2(34)
