曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

option for the main A340 model you are going to fly. This will start a program that will let you select the
most suitable option from a drop-down list. It will also display a preview image of the selected option.
Once you have selected the option you require click the ‘Set values’ button to activate the option in
Flight Simulator.
The three viewpoint options are:
• Normal VC viewpoint. Select this if you are going to be flying the standard version of the model.
This model will let you fully control the aircraft from the 3D virtual cockpit as well as from the 2D panel.
• Cabin viewpoint. Select this if you are going to be flying the ‘Cabin and Wingview’ version of the model.
You will be able to control this model from the 2D panel but when you switch to 3D virtual cockpit you
will be placed in the passenger cabin.
• Wing/No VC viewpoint. Select this if you are going to be flying the ‘Wingview’ version of the model.
In this model you will be able to control the aircraft from the 2D panel. If you switch to 3D virtual
cockpit you will see the wings on either side of you but no 3D panel. This version is provided so that
users with less powerful computers can fly the A340 without the performance impact of a highly
detailed 3D cockpit.
RECOMMENDED SOUND SETTINGS
We recommend that for best results you set your sounds as follows:
8 9
Note that to get the best effect when you are using the ‘wingview and cabin’ and ‘wingview’ models
you should use the Viewpoint setting tools to select the appropriate starting viewpoint for the
chosen model.
6. When you have selected your aircraft model you can select the individual livery you wish to fly from the
‘Variations’ list.
In Flight Simulator X
1. Start Flight Simulator
2. Click on “Free Flight” and press the “Change” tab for Current Aircraft
3. From the “Publisher” drop-down menu, select Just Flight – Commercial Level Simulations.
Then, follow steps 5 and 6 above as for FS2004.
AIRCRAFT CONTROLS
To activate the aircraft pushback from the gate and see the 3D pushback truck moving the aircraft use the
pushback start/stop key on the keyboard. By default this is set to SHIFT+P in Flight Simulator unless you
have changed your key assignments
The main doors can be opened from the overhead panel. Some of them can also be opened using the keyboard.
To open the main door press SHIFT+E
To open the secondary passenger door press the key combination assigned to ‘Tailhook up/down’. This is
not assigned by default in Flight Simulator so you may need to set up a key assignment for it.
To open the rear cargo door press the key combination assigned to ‘Wing fold/unfold’. This is not assigned
by default in Flight Simulator so you may need to set up a key assignment for it.
For improved ability to move around the Virtual Cockpit in Flight Simulator 2004, you may wish to install the
Flight 1 View Module from: www.flight1.com which has been included on the DVD-ROM with their kind
permission. This gives improved control of movement around the VC. Areas and viewpoints can be accessed
that are impossible with the default Flight Simulator software. Instructions for installing and using it can be
found in the Extra\F1View folder on the A340 DVD-ROM.
FLIGHT MODEL SETTINGS
The A340 500-600 models each come supplied with realistic flight models representing as closely as
possible the characteristics of the real aircraft. However you may wish to utilise a simpler and easier to fly
version while you get familiar with the aircraft.
If you wish to switch to the simplified flight models for any of the aircraft go to Start\Programs\Just
Flight\A340 500-600 and select the ‘Flight Model Settings’ option. This will start a program that shows the
three different A340 variations and which flight model is currently selected. Click the options to change the
model or models you require and click the ‘Set values’ button to activate your new settings in Flight
Simulator. Use this program whenever you wish to change an A340 aircraft to either the realistic or
simplified flight characteristics.
10 11
THE PANELS
The CLS A340-500/600 panel has custom gauges, and is designed as an efficient, highly functional panel.
Users can complete an entire flight from either the 2D panel, or the 3D Virtual Cockpit.
PANEL SWITCHES
LOWER EICAM
PEDESTAL
1 - MCDU controls
2 - Radio select
3 - Radio/Nav select
4 - Engine throttles
5 - Fuel cutoff switches
6 - Engine start
7 - Speed brakes
8 - Parking brake
9 - Flaps control
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料2(99)