曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

plates [14] from the aileron bus drum [20].
(c) Disengage the cable ABSA [19] and cable ABSB [22] from the aileron bus drum [20].
(d) Safety the disconnected cable ABSA [19] and cable ABSB [22] to secure them.
(e) Remove the cotter pin [6], washers [5] to remove the cable retention pins [4] between the
support frames [7] and [21].
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-11-14
Page 401
Jun 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(f) Remove the nuts [23] and screws [25] to disconnect the System B upper quadrant
assembly from the System A lower quadrant assembly.
(g) For system A, do these steps:
1) Remove the nut [47], washer [46], washer [45] and bolt [44] to disconnect the diagonal
support [39] from the structure.
2) Remove the nut [34], washer [33], washer [32] and bolt [31] to remove the diagonal
support [39] from the support frame [21].
3) Remove the nuts [49] to remove the hydraulic fittings.
4) Remove the nut [30], washer [29], washer [28], bolt [27], nut [38], washer [37], washer
[36], and bolt [35] to remove the support frame [21] from the structure.
(h) For system B, do these steps:
1) Remove the nut [12], washer [11], bushing [10], washer [9] and bolt [8] to disconnect the
spring cartridge [13] at the inboard end;
2) Remove the nut [68], washer [69], bushing [70], shims [67], washer [72] and bolt [71] to
disconnect the diagonal support [62] from the structure;
3) Remove the nut [55], washer [54], washer [53] and bolt [52] to remove the diagonal
support [62] from the support assembly [56];
4) Remove the nut [30], washer [29], washer [28], bolt [27] and nut [66], washer [65],
washer [64], bolt [63] to remove the support frame [7] from the structure.
(i) For system A, do these steps:
1) Remove the nuts [43], washers [42], washers [41] and bolts [40] to disconnect the
support assembly [50] from the structure;
2) Remove the linkage [1] from the airplane.
(j) For system B, do these steps:
1) Remove the nuts [43], washers [42], washers [41] and bolts [40] to disconnect the
support assembly [56] from the structure.
2) Remove the linkage [2] from the airplane.
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-11-14
Page 402
Jun 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Aileron Power Control Unit Linkage Installation
Figure 401 (Sheet 1 of 4)/27-11-14-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-11-14
Page 403
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Aileron Power Control Unit Linkage Installation
Figure 401 (Sheet 2 of 4)/27-11-14-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-11-14
Page 404
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Aileron Power Control Unit Linkage Installation
Figure 401 (Sheet 3 of 4)/27-11-14-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-11-14
Page 405
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Aileron Power Control Unit Linkage Installation
Figure 401 (Sheet 4 of 4)/27-11-14-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-11-14
Page 406
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-11-14-400-801
3. Aileron Power Control Unit Linkage Installation
(Figure 401)
A. References
Reference Title
27-11-00-700-809 Aileron Travel Test (P/B 501)
27-11-00-820-801 Aileron Cables Adjustment (P/B 501)
27-11-71-400-801 Aileron Power Control Unit Installation (P/B 401)
B. Tools/Equipment
NOTE: When more than one tool part number is listed under the same "Reference" number, the
tools shown are alternates to each other within the same airplane series. Tool part numbers
that are replaced or non-procurable are preceded by "Opt:", which stands for Optional.
Reference Description
SPL-1585 Kit - Rigging Pins, All Systems
(Part #: F70207-109, Supplier: 81205, A/P Effectivity: 737-600, -700,
-700C, -700ER, -700QC, -800, -900, -900ER, -BBJ)
C. Consumable Materials
Reference Description Specification
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL飛機維護手冊1(143)