曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

L2 Select ADR 3 pb-sw (if available) to first officer side.
L1 ADR 2................................................................................................................................... OFF
BARO REF........................................................................................................................ CHECK
L2 If ADR 2 pb-sw fails, both baro reference channels are driven by the same FCU channel.
Consequently the baro reference displays must be checked.
L1�� ADR 3 pb-sw FAULT:
AIR DATA SWTG (IF ADR 3 IN USE)............................................................................... NORM
ADR 3................................................................................................................................... OFF
To be continued on next page
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
ABNORMAL AND EMERGENCY PROCEDURES
NAVIGATION
A318/A319/A320/A321 FLEET PRO-ABN-34 P 9/164
FCOM 19 AUG 10
NAV ADR 1(2)(3) FAULT (Cont'd)
L2Note: In case of simultaneous failure of ADR and IR (same ADIRU), apply ADR FAULT
procedure before IR FAULT procedure.
L1�� ADR 1 pb-sw FAULT:
AIR DATA SWTG..............................................................................................................CAPT 3
L2 Select ADR 3 pb-sw (if available ) to captain side.
The GPWS TERR FAULT light comes on as the enhanced functions of the EGPWS TERR are
inhibited. As such, the GPWS TERR pb-sw should be switched OFF.
L1 ADR 1 P/B.............................................................................................................................. OFF
L2 Depending on ADR failure, ADR should be switched off.
L1�� ADR 2 pb-sw FAULT:
AIR DATA SWTG................................................................................................................. F/O 3
L2 Select ADR 3 pb-sw (if available) to first officer side.
L1 ADR 2 P/B.............................................................................................................................. OFF
BARO REF........................................................................................................................ CHECK
L2 If ADR 2 pb-sw fails, both baro reference channels are driven by the same FCU channel.
Consequently the baro reference displays must be checked.
L1�� ADR 3 pb-sw FAULT:
AIR DATA SWTG (IF ADR 3 IN USE)............................................................................... NORM
ADR 3 P/B.............................................................................................................................. OFF
STATUS
CAT 3 SINGLE ONLY INOP SYS
ADR 1(2)(3)
CAT 3 DUAL
GPWS (1)
(1) (in case of ADR 1 FAULT only)
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
ABNORMAL AND EMERGENCY PROCEDURES
NAVIGATION
A318/A319/A320/A321 FLEET PRO-ABN-34 P 10/164
FCOM 19 AUG 10
NAV ADR 1(2)(3) FAULT
Applicable to: , , MSN,,,
L2Note: In case of simultaneous failure of ADR and IR (same ADIRU), apply ADR FAULT
procedure before IR FAULT procedure.
L1�� ADR 1 pb-sw FAULT:
AIR DATA SWTG..............................................................................................................CAPT 3
L2 Select ADR 3 pb-sw (if available ) to captain side.
The GPWS TERR FAULT light comes on as the enhanced functions of the EGPWS TERR are
inhibited. As such, the GPWS TERR pb-sw should be switched OFF.
L1 ADR 1 P/B.............................................................................................................................. OFF
L2 Depending on ADR failure, ADR should be switched off.
L1�� ADR 2 pb-sw FAULT:
AIR DATA SWTG................................................................................................................. F/O 3
L2 Select ADR 3 pb-sw (if available) to first officer side.
L1 ADR 2 P/B.............................................................................................................................. OFF
BARO REF........................................................................................................................ CHECK
L2 If ADR 2 pb-sw fails, both baro reference channels are driven by the same FCU channel.
Consequently the baro reference displays must be checked.
L1�� ADR 3 pb-sw FAULT:
AIR DATA SWTG (IF ADR 3 IN USE)............................................................................... NORM
ADR 3 P/B.............................................................................................................................. OFF
STATUS
CAT 3 SINGLE ONLY INOP SYS
ADR 1(2)(3)
CAT 3 DUAL
GPWS (1)
(1) (in case of ADR 1 FAULT only)
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320機組操作手冊FLIGHT CREW OPERATING MANUAL 10(52)