R **ON A/C 001-049, 051-061, 101-103, 201-203, 28-25-52-991-001 Fig. 401
1EFF : ALL 1 28-25-52Page 408 1 1 May 01/05 1 1 1CES 1 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
**ON A/C ALL
R Post SB 28-1077 For A/C 001-049,051-061,101-103,201-203, 28-25-52-991-001-A Fig. 401A **ON A/C ALL
3. Job Set-up
__________
Subtask 28-25-52-941-053
A. Safety Precautions WARNING : OBEY THE SAFETY PROCEDURES WHEN YOU DO WORK IN A FUEL TANK.
_______
(1) You must obey the fuel safety procedures (Ref. TASK 28-10-00-910-001) when you do work in a fuel tank.
(2) Make sure that the safety barriers are in position.
Subtask 28-25-52-860-052
B. Aircraft Maintenance Configuration
(1)
Make sure that the applicable fuel tank is defueled (Ref. TASK 28-25-00-650-001).
(2)
Make sure that the remaining fuel has been drained from the applicable fuel tank (Ref. TASK 28-25-00-650-003).
(3)
Make sure that the access platform is below the applicable access panel 540JB (640JB).
(4)
Make sure that the applicable wing access panel is removed (Ref. TASK 28-10-00-910-002), (Ref. TASK 57-27-11-000-002):
-
FOR 19QM
remove 540JB
-
FOR 20QM
remove 640JB.
1EFF : ALL 1 28-25-52Page 409 1 1 May 01/05 1 1 1CES 1
(5) Make sure that the refuel valve has been removed (Ref. TASK 28-25-51-000-001).
Subtask 28-25-52-865-051
C. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU FUEL/RFL/DFL/SPLY 2QU L24 121VU FUEL/RFL/DFL/XFR/DEFUEL/VALVE 1QU L23
4. Procedure
_________ R **ON A/C 001-049, 051-061, 101-103, 201-203,
(Ref. Fig. 401/TASK 28-25-52-991-001) **ON A/C ALL R Post SB 28-1077 For A/C 001-049,051-061,101-103,201-203, (Ref. Fig. 401A/TASK 28-25-52-991-001-A) **ON A/C ALL
Subtask 28-25-52-420-054
A. Preparation for Installation
(1)
Clean the component interfaces and/or the adjacent areas with a MISCELLANEOUS (Material No. 19-003) made moist with CLEANING AGENTS (Material No. 11-026).
(2)
Lubricate the new O-ring (11) with FUELS (Material No. 01-001) or COMMON GREASE (Material No. 04-012).
(3)
Install the O-ring (11) in the groove on the face of the refuel valve canister (10).
1EFF : ALL 1 28-25-52Page 410 1 1 May 01/05 1 1 1CES 1
R **ON A/C 001-049, 051-061, 101-103, 201-203,
Subtask 28-25-52-420-050
B. Installation of the Refuel Valve Canister 19QM (20QM)
(1)
Install the refuel valve canister (10) on the front spar.
(2)
Install the spacer (13) and attach with the bolts (12).
(3)
Remove the blanking plugs from the disconnected line ends.
(4)
Lubricate the new O-ring (3) with FUELS (Material No. 01-001).
(5)
Install the O-ring. (3) in the groove in the adapter (14). Connect the adapter (14) to the refuel valve canister (10) with the bolts (2).
(6)
Lubricate the new O-ring (7) with FUELS (Material No. 01-001).
(7)
Install the O-ring (7) in the groove in the elbow (8). Connect the elbow (8) to the refuel valve canister (10) with the bolts (9).
(8)
Use the screw (5) and the nut (4) to attach the bonding straps (1) and (6) to the refuel valve canister (10) (Ref. TASK 20-28-00-912-002).
**ON A/C ALL R Post SB 28-1077 For A/C 001-049,051-061,101-103,201-203, Subtask 28-25-52-420-050-A
B. Installation of the Refuel Valve Canister 19QM (20QM)
(1)
Install the refuel valve canister (10) on the front spar.
(2)
Install the spacer (13) and attach with the bolts (12).
(3)
Remove the blanking plugs from the disconnected line ends.
(4)
Lubricate the new O-ring (3) with FUELS (Material No. 01-001).
(5)
Install the O-ring. (3) in the groove in the adapter (14). Connect the adapter (14) to the refuel valve canister (10) with the bolts (2).
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUEL 燃油4(100)
