B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
28-25-55-991-001 Fig. 401
1EFF : ALL 1 28-25-55Page 401 1 1 May 01/04 1 1 1CES 1
3. Job Set-up
__________
(Ref. Fig. 401/TASK 28-25-55-991-001) Subtask 28-25-55-941-051
A. Safety Precautions
(1) Put the safety barriers in position. Subtask 28-25-55-010-050
B. Get Access
(1) Open the access door 192MB. NOTE : Do not keep the door open longer than necessary because the
____
battery can discharge.
Subtask 28-25-55-865-050
C. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU FUEL/RFL/DFL/SPLY 2QU L24 121VU FUEL/RFL/DFL/XFR/DEFUEL/VALVE 1QU L23
4. Procedure
_________
(Ref. Fig. 401/TASK 28-25-55-991-001) Subtask 28-25-55-020-050
A. Removal of the Refuel Panel 800VU CAUTION : DO NOT PULL THE PANEL TOO FAR AND DO NOT LET IT HANG ON THE
_______ ELECTRICAL CABLES. THIS CAN CAUSE DAMAGE TO THE ELECTRICAL CABLES.
(1)
Release the fasteners (4) and carefully remove the refuel panel (3) from the instrument rack.
(2)
Disconnect the electrical connectors (1) and (2) from the refuel panel (3).
1EFF : ALL 1 28-25-55Page 402 1 1 May 01/04R 1 1 1CES 1
Refuel Panel 800VU
Figure 401/TASK 28-25-55-991-001
1EFF : ALL 1 28-25-55 Page 403
1 1 Feb 01/98
1 1
1CES 1
(3) Put blanking caps on the disconnected electrical connectors (1) and
(2) and the refuel panel (3).
1EFF : ALL 1 28-25-55Page 404 1 1 May 01/04R 1 1 1CES 1
TASK 28-25-55-400-001
Installation of the Refuel Panel 800VU
WARNING : MAKE SURE THAT THE FLIGHT CONTROL SAFETY-LOCKS AND THE WARNING
_______
NOTICES ARE IN POSITION.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
GEAR.
1. Reason for the Job
__________________
R R Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific safety barriers
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004 USA MIL-T-81533
1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
(Ref. 20-31-00)
Material No. 19-003 USA AMS 3819
LINT-FREE COTTON CLOTH (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
28-25-00-710-002 Operational Test of the Defuel System
28-25-00-710-003 Operational Test of the Refuel System
28-25-55-991-001 Fig. 401
1EFF : ALL 1 28-25-55Page 405 1 1 May 01/04 1 1 1CES 1
3. Job Set-up
__________ Subtask 28-25-55-941-052
A. Safety Precautions
(1)
Make sure that the safety barriers are in position. Subtask 28-25-55-860-051
B. Aircraft Maintenance Configuration
(1)
Make sure that the access door 192MB is open. Subtask 28-25-55-865-051
C. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU FUEL/RFL/DFL/SPLY 2QU L24 121VU FUEL/RFL/DFL/XFR/DEFUEL/VALVE 1QU L23
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUEL 燃油4(108)
