1EFF : 301-399, 1 28-26-00Page 511 1 1 May 01/04 1 1 1CES 1 Subtask 28-26-00-860-051
B. Aircraft Maintenance Configuration
(1)
Do the EIS Stop Procedure (Ref. TASK 31-60-00-860-002).
(2)
De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
Subtask 28-26-00-942-050
C. Removal of Equipment
(1)
Remove the safety barriers.
(2)
Make sure that the work area is clean and clear of tool(s) and other items.
(3)
Remove the warning notice(s).
(4)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
1EFF : 301-399, 1 28-26-00Page 512 1 1 May 01/04 1 1 1CES 1 TASK 28-26-00-720-001
Functional Test of the FUEL AUTO TRANSFER FAULT of the Main Transfer System
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific safety barriers No specific warning notice
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
12-11-28-650-003 Pressure Refuel with Automatic Control 24-41-00-861-002 Energize the Aircraft Electrical Circuits from the
External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied
from the External Power 28-25-00-650-001 Pressure Defuel 28-25-00-869-001 Fuel Transfer 31-60-00-860-001 EIS Start Procedure 31-60-00-860-002 EIS Stop Procedure 28-26-00-991-001 Fig. 501
1EFF : 301-399, 1 28-26-00Page 513 1 1 May 01/04 1 1 1CES 1
3. Job Set-up
__________
(Ref. Fig. 501/TASK 28-26-00-991-001) Subtask 28-26-00-941-052
A. Safety Precautions
(1)
Put the safety barriers in position.
(2)
Put a warning notice in position to tell persons not to operate the flight controls.
Subtask 28-26-00-860-052
B. Aircraft Maintenance Configuration WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED
_______ BEFORE YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
WARNING : OBEY THE FUEL SAFETY PROCEDURES.
_______
(1)
Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002).
(2)
Do the EIS start procedure (ECAM only) (Ref. TASK 31-60-00-860-001).
(3)
On the ECAM control panel (CP), push (in) the FUEL push icon switch.
(4)
Make sure that the FUEL page shows on the ECAM lower display unit (DU).
(5)
Open the access door 192MB.
(6)
Refuel (Ref. TASK 12-11-28-650-003), defuel (Ref. TASK 28-25-00-650-001) or transfer fuel (Ref. TASK 28-25-00-869-001) to get these fuel levels:
-wing tanks less than 5000 kg (11000 lb)
-center tank more than 250 kg (550 lb).
(7)
On the refuel/defuel panel 800VU, lift the guard and put the MODE SELECT switch to the REFUEL position.
(8)
On the ECAM upper DU, make sure that no FUEL caution messages are shown.
1EFF : 301-399, 1 28-26-00Page 514 1 1 May 01/04 1 1 1CES 1
(9) On the panel 40VU, make sure that these pushbutton switches (P/BSWs) are set as follows:
-CTR TK MODE SEL released out, MAN
-L TK PUMPS 1 and 2 released out, OFF
-R TK PUMPS 1 and 2 released out, OFF
-CTR TK L XFR and CTR TK R XFR released out, OFF
-X FEED released out, all lights off.
4. Procedure
_________
(Ref. Fig. 501/TASK 28-26-00-991-001)
Subtask 28-26-00-720-050
A. Functional Test of the FUEL AUTO TRANSFER FAULT of the Main Transfer System
(1) Do this test:
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUEL 燃油4(118)
