1EFF : ALL 1 32-11-27Page 601 1 1 May 01/04 1 1 1CES 1 B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
07-11-00-581-001 Lifting for Aircraft Maintenance Operations
07-11-00-586-002 Lowering of the Aircraft for Maintenance Operations
07-12-00-582-002 Jacking for Main Gear Wheel Change
29-00-00-864-001 Put the Related Hydraulic System in the Depressurized
Configuration before Maintenance Action
29-14-00-614-001 Depressurization of the Hydraulic Reservoirs
32-00-00-481-001 Installation of the Safety Devices on the Landing
Gears
32-11-27-000-001 Removal of the MLG Torque Links
32-11-27-400-001 Installation of the MLG Torque Links
32-41-11-000-006 Removal of the MLG Wheel
(2649GM,2650GM,2651GM,2652GM)
32-41-11-400-006 Installation of the MLG Wheel
(2649GM,2650GM,2651GM,2652GM)
32-42-27-000-001 Removal of the Brake (2641GM,2642GM,2643GM,2644GM)
32-42-27-400-001 Installation of the Brake
(2641GM,2642GM,2643GM,2644GM)
CMM 321133 (for corrective action)
CMM 321222 (for corrective action)
CMM 321225 (for corrective action)
**ON A/C 001-003, 051-052, 32-11-27-991-003 Fig. 601 R **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
32-11-27-991-003-A Fig. 601A
**ON A/C ALL
32-11-27-991-010 Fig. 602
**ON A/C 001-003, 051-052,
32-11-27-991-008 Fig. 603
1EFF : ALL 1 32-11-27Page 602 1 1 Aug 01/05 1 1 1CES 1 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
32-11-27-991-008-B Fig. 603A
**ON A/C ALL
3. Job Set-up
__________
Subtask 32-11-27-941-051
A. Safety Precautions
(1)
Put the safety barriers in position.
(2)
Make sure that the ground safety locks are installed on the landing gear (Ref. TASK 32-00-00-481-001).
(3)
On the panel 400VU:
-make sure that the landing-gear control-lever 6GA is in the DOWN position
-put a warning notice in the cockpit to tell persons not to operate the landing gear.
(4)
Put a warning notice on the MLG ground-opening handle to tell persons not to open the MLG doors.
(5)
Put a warning notice in position to tell persons not to pressurize the hydraulic systems.
Subtask 32-11-27-860-053
B. Aircraft Maintenance Configuration
(1)
Depressurize the Yellow and the Green Hydraulic systems (Ref. TASK 29-00-00-864-001).
(2)
Make sure that the Yellow and the Green Hydraulic reservoirs have been depressurized (Ref. TASK 29-14-00-614-001).
(3)
Lift the applicable MLG axle (Ref. TASK 07-12-00-582-002) or lift the aircraft on jacks (Ref. TASK 07-11-00-581-001).
1EFF : ALL 1 32-11-27Page 603 1 1 Aug 01/05 1 1 1CES 1 Subtask 32-11-27-010-052
C. Get Access
(1) Remove the applicable MLG wheels (Ref. TASK 32-41-11-000-006) and brakes (Ref. TASK 32-42-27-000-001).
4. Procedure
_________
**ON A/C 001-003, 051-052,
(Ref. Fig. 601/TASK 32-11-27-991-003) R **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
(Ref. Fig. 601A/TASK 32-11-27-991-003-A)
**ON A/C ALL
(Ref. Fig. 602/TASK 32-11-27-991-010)
**ON A/C 001-003, 051-052,
(Ref. Fig. 603/TASK 32-11-27-991-008) R **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
(Ref. Fig. 603A/TASK 32-11-27-991-008-B)
**ON A/C 001-003, 051-052,
Subtask 32-11-27-220-059-B
A. Inspection Procedure
(Ref. Fig. 601/TASK 32-11-27-991-003)
(1) Do a check of the axial clearances at the connections of the top and bottom torque-link hinges: 中國航空網 www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架2(100)
