曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 (12) Tighten the nuts (3), (6), (9) and (12) with your hand.
 (13) Connect the hoses (1) and (2) to the pipes (7) and (8).
 (14) Tighten the nuts (3), (6), (9) and (12) and safety with MISCELLANEOUS (Material No. 19-010).
 Subtask 32-11-22-720-050 
R  C. Functional Test of the MLG Lockstay Actuating Cylinder 
R R  NOTE : If the lockstay brace tool is used, the aircraft can stay on____ wheels for the functional test. 
R R  (1) If the LOCKSTAY BRACE TOOL (DRT 68864) is available: 
R  (a) Install the brace tool (Ref. TASK 32-00-00-480-001). 
R R  (b) Do a functional test of the MLG Lockstay Actuating Cylinder (Ref. TASK 32-31-00-720-007). 
R  (c) Remove the brace tool (Ref. TASK 32-00-00-080-001). 
R  (2) If the lockstay brace tool is not available: 
R R  (a) Do a functional test of the Normal Extension and Retraction of the L/G (Ref. TASK 32-31-00-720-002).
 Subtask 32-11-22-790-050
 D. Check the Hydraulic System for Leaks
 (1) Make sure that all the connections that you have moved are tightened, and that there are no hydraulic leaks.

 

 5. Close-up
________ Subtask 32-11-22-942-050
 A. Removal of Equipment
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Remove the safety barriers.

 (3)
 Remove the warning notice(s).

 (4)
 Remove the access platform(s).

 (5)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 1EFF : ALL 1 32-11-22Page 411 1 1 Aug 01/05R 1 1 1CES 1

 TORQUE LINK ASSY - MLG - REMOVAL/INSTALLATION
_____________________________________________
 TASK 32-11-27-000-001
 Removal of the MLG Torque Links
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific safety barriers No specific warning notice
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
07-11-00-581-001 Lifting for Aircraft Maintenance Operations 07-12-00-582-002 Jacking for Main Gear Wheel Change 32-00-00-481-001 Installation of the Safety Devices on the Landing
 Gears 32-11-12-000-001 Removal of the MLG Hydraulic Dressings 32-11-29-000-001 Removal of the Torque Link Damper 2823GM, 2824GM 32-11-43-000-001 Removal of the 1M and 2M Harnesses from the MLG Leg 32-41-11-000-006 Removal of the MLG Wheel
 (2649GM,2650GM,2651GM,2652GM) 32-42-27-000-001 Removal of the Brake (2641GM,2642GM,2643GM,2644GM)
 1EFF : ALL 1 32-11-27Page 401 1 1 May 01/04R 1 1 1CES 1

 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
**ON A/C 001-003, 051-052,
 32-11-27-991-001 Fig. 401 R **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
 32-11-27-991-001-A Fig. 401A
 **ON A/C ALL
 3. Job Set-up
__________
 Subtask 32-11-27-941-053

 A. Safety Precautions
 (1)
 Put the safety barriers in position.

 (2)
 Make sure that the ground safety locks are installed on the landing gear (Ref. TASK 32-00-00-481-001).

 (3)
 On the panel 400VU:

 -make sure that the landing-gear control-lever 6GA is in the DOWN position
 -put a warning notice in position to tell persons not to operate the landing gear.

 (4)
 Put a warning notice in position to tell persons not to operate the brakes.

 (5)
 Put a warning notice in position to tell persons not to pressurize the hydraulic systems.

 Subtask 32-11-27-582-050
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架2(94)