(13)
Clean the nuts and bolts you installed with a clean MISCELLANEOUS (Material No. 19-003) and CLEANING AGENTS (Material No. 11-026).
(14)
Apply a layer of SEALANTS (Material No. 09-016) to the nuts and bolts you installed and the areas around them. Make sure the drain hole under the collar (32) is clear.
(15)
Install the MLG brakes (Ref. TASK 32-42-27-400-001).
(16)
Install the MLG wheels (Ref. TASK 32-41-11-400-006).
(17) Fill and charge the MLG shock absorber (Ref. TASK 12-12-32-611-008). **ON A/C ALL
Subtask 32-11-13-860-057
D. Preparation For Test
(1)
Pressurize the Green and the Yellow hydraulic systems (Ref. TASK 29-10-00-863-001), (Ref. TASK 29-10-00-863-002).
(2)
Pressurize the applicable hydraulic reservoirs (Ref. TASK 29-14-00-614-002).
(3)
Energize the aircraft electrical network (Ref. TASK 24-41-00-861-002).
1EFF : ALL 1 32-11-13Page 439 1 1 May 01/05R 1 1 1CES 1
Subtask 32-11-13-865-052
E. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 1GA, 2GA, 52GA, 1GG, 2GG, 3GG, 4GG.
Subtask 32-11-13-790-050
F. Leak Test
(1) Examine the shock absorber (1) for leaks.
**ON A/C 051-099,
Subtask 32-11-13-710-050-A
G. Operational Test
(1) Do an operational test of the brake cooling fans (Ref. TASK 32-48-00-710-001).
(2) Do an operational test of the TPIS (Ref. TASK 32-49-00-710-001). R **ON A/C 301-399, 401-499,
Subtask 32-11-13-710-050
G. Operational Test
(1) Do an operational test of the brake cooling fans (Ref. TASK 32-48-00-710-001).
**ON A/C ALL
Subtask 32-11-13-720-050
H. Functional Test
(1) Do a functional test of the landing gear (Ref. TASK 32-31-00-720-002).
1EFF : ALL 1 32-11-13Page 440 1 1 Aug 01/05 1 1 1CES 1 Subtask 32-11-13-740-050
J. BITE Test
(1) Do a BITE test of the MLG (Ref. TASK 32-69-00-740-001).
5. Close-up
________ R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
Subtask 32-11-13-860-058
A. Aircraft Maintenance Configuration
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
(3)
Lower the aircraft off jacks (Ref. TASK 07-11-00-586-002).
(4)
If applicable, put the aircraft in the ground configuration (Ref. TASK 32-00-00-860-002).
**ON A/C 301-399,
Subtask 32-11-13-860-058-A
A. Aircraft Maintenance Configuration
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
(3)
Lower the aircraft off jacks (Ref. TASK 07-11-00-586-002).
(4)
If applicable, put the aircraft in the ground configuration (Ref. TASK 32-00-00-860-002).
1EFF : ALL 1 32-11-13Page 441 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL
Subtask 32-11-13-942-050
B. Removal of Equipment
(1)
Remove the safety barriers.
(2)
Remove the warning notice(s).
(3)
Remove the access platform(s).
(4)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
1EFF : ALL 1 32-11-13Page 442 1 1 May 01/05R 1 1 1CES 1
TASK 32-11-13-000-003
Removal of the MLG Shock-Absorber Gland-Seals
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
1. Reason for the Job__________________
Self Explanatory
2. Job Set-up Information______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific safety barriers No specific warning notice No specific warning notices 460006211 1 LIFTING TACKLE 460006212 1 BUILD TROLLEY 460006409 1 ASSEMBLY AND EXTRACTION TOOL 460007240 1 BUILD TROLLEY 460007253 1 PIN SPANNER
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架2(26)
