________________________________________________
 TASK 32-11-13-000-001
 Removal of the MLG Shock Absorber
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 1. Reason for the Job__________________
 Self Explanatory
 2. Job Set-up Information______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE  QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific  blanking cap
 No specific  charging adapter
 No specific  circuit breaker(s) safety clip(s)
 No specific  safety barriers
 No specific  warning notice
 No specific  warning notices
 No specific  200 kg (440 lb) hand-operated forklift (angle of lift +10 to -10 degrees)
 No specific  access platform 3 m (9 ft. 10 in.)
 No specific  container 4 l (1.0566 USgal)
 1EFF : ALL 1 32-11-13Page 401 1 1 May 01/04R 1 1 1CES 1

 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
07-11-00-581-001  Lifting for Aircraft Maintenance Operations
 24-41-00-862-002  De-energize the Aircraft Electrical Circuits Supplied
 from the External Power
 29-00-00-864-001  Put the Related Hydraulic System in the Depressurized
 Configuration before Maintenance Action
 29-14-00-614-001  Depressurization of the Hydraulic Reservoirs
 32-00-00-481-001  Installation of the Safety Devices on the Landing
 Gears
 32-00-00-860-001  Flight Configuration Precautions with Electrical
 Power
 32-11-13-000-003  Removal of the MLG Shock-Absorber Gland-Seals
 32-11-43-000-003  Removal of the 1M and 2M Harnesses from the MLG Axle
 32-12-00-010-001  Open the Main Gear Doors for Access
 32-41-11-000-006  Removal of the MLG Wheel
 (2649GM,2650GM,2651GM,2652GM)
 32-42-27-000-001  Removal of the Brake (2641GM,2642GM,2643GM,2644GM)
 32-42-57-000-001  Removal of the Tachometer
 32-42-71-000-001  Removal of the MLG Axle Adaptor-Sleeves
 32-48-51-000-005  Removal of the Fan Assy (7GS,8GS,9GS,10GS)
 32-49-18-000-001  Removal of the Rotating Mechanism

 **ON A/C 001-003, 051-052,
R  32-11-13-991-001-C Fig. 401 **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
 32-11-13-991-001-B Fig. 401A **ON A/C 001-003, 051-052,
R  32-11-13-991-002 Fig. 402 **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
 32-11-13-991-002-A  Fig. 402A

 1EFF : ALL 1 32-11-13Page 402 1 1 Aug 01/05 1 1 1CES 1 -------------------------------------------------------------------------------

REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
**ON A/C 001-003, 051-052,
 32-11-13-991-009 Fig. 403 R **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
 32-11-13-991-009-A Fig. 403A
 **ON A/C ALL
 3. Job Set-up
__________
 Subtask 32-11-13-941-050

 A. Safety Precautions
 (1)
 Put the safety barriers in position.

 (2)
 Make sure that the safety devices are installed on the landing gear (Ref. TASK 32-00-00-481-001).

 (3)
 On the panel 400VU:

 -make sure that the landing gear control-lever 6GA is in the DOWN position
 -put a warning notice in position to tell persons not to operate the landing gear.

 (4)
 Put the warning notices in the cockpit to tell persons not to operate the brakes.

 (5)
 Put the warning notices in position on the ground hydraulic services connections to tell persons not to operate the Green or the Yellow hydraulic systems.

 1EFF : ALL 1 32-11-13Page 403 1 1 Aug 01/05 1 1 1CES 1 Subtask 32-11-13-860-050

 B. Aircraft Maintenance Configuration
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架2(14)