曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

R  1. Reason for the Job__________________ 
R  Refer to the MPD TASK: 521103-01 
R  2. Job Set-up Information______________________ 
R  A. Fixtures, Tools, Test and Support Equipment 
R  -------------------------------------------------------------------------------
R  REFERENCE QTY DESIGNATION 
R  -------------------------------------------------------------------------------
R  No specific access platform 3.5 m (11 ft. 6 in.) 
R  B. Consumable Materials 
R  -------------------------------------------------------------------------------
R  REFERENCE DESIGNATION 
R  -------------------------------------------------------------------------------
R  Material No. 11-004 USA MIL-T-81533 
R  1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) 
R  (Ref. 20-31-00) 
R  Material No. 19-003 USA AMS 3819 
R  LINT-FREE COTTON CLOTH (Ref. 20-31-00) 
R  C. Referenced Information 
R  -------------------------------------------------------------------------------
R  REFERENCE DESIGNATION 
R  -------------------------------------------------------------------------------
R  SRM 511100 P.Block 001 (for corrective action) 
R  SRM 512200 P.Block 001 (for corrective action) 
R  52-11-00-991-022 Fig. 604

 1EFF : ALL 1 52-11-00Page 616 1 1 May 01/03 1 1 1CES 1 1EFF : ALL 1 52-11-00Page 617 1 1 May 01/03 1 1 1CES 1R Forward Passenger/Crew Doors - Skin - External Surface R Figure 604/TASK 52-11-00-991-022

R  3. Job Set-up__________ 
R  Subtask 52-11-00-010-063 
R  A. Get Access 
R  (1) Put an access platform in position : 
R  (a) For the left passenger/crew door at the zone 831. 
R  (b) For the right passenger/crew door at the zone 841. 
R  Subtask 52-11-00-110-052 
R  B. Cleaning of the Structure 
R  WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ 
R  MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. 
R  OBEY THE MANUFACTURERS INSTRUCTIONS. 
R  PUT ON PROTECTIVE CLOTHING. 
R  DO NOT GET THEM IN YOUR MOUTH. 
R  DO NOT SMOKE. 
R  DO NOT BREATHE THE GAS. 
R  THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. 
R  GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED. 
R  WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE_______ 
R  MATERIAL/S. 
R  USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK. 
R  (1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) 
R  and with a lint-free cotton cloth MISCELLANEOUS (Material No. 19-
R  003), if necessary. 
R  4. Procedure_________ 
R  Subtask 52-11-00-210-055 
R  A. Inspection 
R  (Ref. Fig. 604/TASK 52-11-00-991-022) 
R  (1) Do a visual inspection of the external surface of the forward left 
R  and right passenger/crew door skin.

 

 1EFF : ALL 1 52-11-00Page 618 1 1 May 01/03 1 1 1CES 1 1EFF : ALL 1 52-11-00Page 619 1 1 May 01/03 1 1 1CES 1R **ON A/C 003-049, 051-099, 101-105, 151-158, 201-210,

R  (2) Make sure that there is no: 
R  (a) Corrosion damage: 
R  - If you find corrosion damage, refer to the Structural Repair 
R  Manual (Ref. SRM 512200 P.Block 001) for types, inspection, 
R  removal and corrosion protection. 
R  (b) Other damage (cracks, scratches, stress, marks, dents, 
R  bumps,...): 
R  - If you find other damage, refer to the Structural Repair Manual 
R  (Ref. SRM 511100 P.Block 001) for damage classification and 
R  corrective action. 
R  5. Close-up________ 
R  Subtask 52-11-00-410-062 
R  A. Close Access 
R  (1) Make sure that the work area is clean and clear of tool(s) and other 
R  items. 
R  (2) Remove the access platform(s).

 

 TASK 52-11-00-200-003
 Detailed Inspection of Passenger/Crew Door Telescopic Girt Bar

 1.
 Reason for the Job

__________________
 Refer to the MPD TASK: 521000-15

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門1(128)