B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004 USA MIL-T-81533
1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
(Ref. 20-31-00)
Material No. 19-003 USA AMS 3819
LINT-FREE COTTON CLOTH (Ref. 20-31-00)
R 1EFF : 003-049, 051-099, 101-105, 151-158, 1 52-11-00Page 620 1201-210, 1May 01/05 1 1 1CES 1 C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-62-44-000-002 Removal of the Escape-Slide Pack-Assembly 25-62-44-400-001 Installation of the Escape-Slide Pack-Assembly 52-10-00-010-001 Opening of the Passenger/Crew Door 52-10-00-410-001 Closing of the Passenger/Crew Door 52-10-00-860-001 Special Precautions before Work on the Passenger/Crew
Door 52-10-00-860-002 Special Precautions after Work on the Passenger/Crew
Door
AOT 52A1111 (for corrective action)
52-11-00-991-025 Fig. 605
3. Job Set-up
__________
Subtask 52-11-00-010-064
A. Get Access
(1) Put an access platform in position: R (a) For the left passenger/crew door, at zone 831 or 832, R (b) For the right passenger/crew door, at zone 841 or 842. R (2) Open the passenger/crew door 831(841) or 832(842) (Ref. TASK 52-10-
00-010-001).
(3) Obey the special precautions before you start work on the door (Ref. TASK 52-10-00-860-001).
Subtask 52-11-00-020-054
B. Removal of the Components
(1) Remove the escape slide/raft (Ref. TASK 25-62-44-000-002).
1EFF : 003-049, 051-099, 101-105, 151-158, 1 52-11-00Page 621 1201-210, 1Aug 01/05 1 1 1CES 1 Subtask 52-11-00-110-054
C. Cleaning of the Structure
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
(1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if necessary.
4. Procedure
_________
Subtask 52-11-00-200-050
A. Inspection
(Ref. Fig. 605/TASK 52-11-00-991-025)
(1)
Do a detailed visual inspection of the U-shaped section (3) of the telescopic girt bar (1). This includes the rivet heads (4) that attach the U-shaped section (3).
(2)
Make sure that there is no:
(a)
Corrosion damage:
-If you find corrosion damage, for replacement (Ref. AOT 52A1111).
(b)
Other damage (cracks, scratches, stress, marks, dents, bumps, ...):
-If you find this type of damage, for replacement (Ref. AOT 52A1111).
(3)
Use a dynamometer and apply a load of between 15 m.daN (110.6194 lbf.ft) and 20 m.daN (147.4926 lbf.ft) on the girt bar (1). Make sure that the girt bar (1) does not retract when you do not manually operate the trigger (2).
R 1EFF : 003-049, 051-099, 101-105, 151-158, 1 52-11-00Page 622 1201-210, 1May 01/05 1 1 1CES 1
U-Shaped Section - Telescopic Girt Bar
Figure 605/TASK 52-11-00-991-025
R 1EFF : 003-049, 051-099, 101-105, 151-158, 1 52-11-00Page 623 1201-210, 1May 01/05 1 1 1CES 1
5. Close-up
________
Subtask 52-11-00-420-054
A. Installation of the Components
(1) Install the escape slide/raft (Ref. TASK 25-62-44-400-001).
Subtask 52-11-00-410-063
B. Close Access
(1) Obey the special precautions after work on the door (Ref. TASK 52-10-00-860-002).
R (2) Close the passenger/crew door 831(841) or 832(842) (Ref. TASK 52-10-00-410-001).
(3)
Make sure that the work area is clean and clear of tool(s) and other items.
(4)
Remove the access platform(s).
1EFF : 003-049, 051-099, 101-105, 151-158, 1 52-11-00Page 624 1201-210, 1Aug 01/05 1 1 1CES 1
DOOR - PASSENGER/CREW, FWD - REMOVAL/INSTALLATION
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門1(129)
