(2)
 Obey the special precautions after the work on the door (Ref. TASK 52-10-00-860-002).

 (3)
 Close the door 831, 841 or 832, 842 (Ref. TASK 52-10-00-410-001).

 (4)
 Remove the access platform(s).

 1EFF : ALL 1 52-10-00Page 407 1 1 Feb 01/04 1 1 1CES 1 TASK 52-10-00-040-001- 01

 Deactivation of the Passenger/Crew Doors - Load Adjustment
 1. Reason for the Job
__________________
R  Refer to the MMEL TASK: 25-60-02-A)
R  Emergency - Escape Slide/Slide Raft
R  Cabin Passenger Door There is an alternative method for this procedure. This task gives one of the methods. For the other method refer to the other task in this page block.
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE  QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
 No specific access platform 4.40 m (14 ft. 5 in.)

 B. Consumable Materials
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
Material No. 19-010  USA AMS 5687
 LOCKWIRE STAINLESS STEEL ANNEALED 0.8MM DIA
 (Ref. 20-31-00)

 1EFF : ALL 1 52-10-00Page 408 1 1 May 01/04 1 1 1CES 1

 C. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
25-23-46-000-001 Removal of the Door Linings at the FWD Passenger/Crew Doors 25-23-46-000-002 Removal of the Door Linings at the AFT Passenger/Crew
 Doors 25-62-44-000-002 Removal of the Escape-Slide Pack-Assembly 52-10-00-010-001 Opening of the Passenger/Crew Door 52-10-00-410-001 Closing of the Passenger/Crew Door 52-10-00-860-001 Special Precautions before Work on the Passenger/Crew
 Door 52-10-00-860-002 Special Precautions after Work on the Passenger/Crew Door
 **ON A/C 001-002,
 52-10-00-991-040 Fig. 402

R **ON A/C 003-049, 051-099, 101-149, 151-199, 201-299, 301-399, 401-499,
 52-10-00-991-040-A Fig. 402A
 **ON A/C ALL
 3. Job Set-up
__________
 Subtask 52-10-00-010-085
 A. Get Access
 (1)
 Put the access platform in position in the zone 831 (841) or 832 (842).

 (2)
 Open the applicable passenger/crew door 831, 841 or 832, 842 (Ref. TASK 52-10-00-010-001).

 (3)
 Obey the special precautions before you start work on the door (Ref. TASK 52-10-00-860-001).

 1EFF : ALL 1 52-10-00Page 409 1 1 Aug 01/05 1 1 1CES 1 Subtask 52-10-00-865-075

 B. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU EIS/SLIDES/ARM AND WARN/FLT 15WN P11 121VU EIS/SLIDES/ARM AND WARN/GND 13WN P10 121VU EIS/SDAC1 AND 2/DOOR/DET/PAX 48WV P05
 **ON A/C 001-002,
 Subtask 52-10-00-010-086
 C. Removal of the Escape Slide
 (1)
 Remove the door lining panels:

 (a)
 For the FWD passenger/crew doors:
 (Ref. TASK 25-23-46-000-001)

 -
for the left door 831AZ

 -
for the right door 841AZ

 (b)
 For the Aft passenger/crew doors:
 (Ref. TASK 25-23-46-000-002)

 -
for the left door 832AZ

 -
for the right door 842AZ

 (2)
 Remove the escape slide (Ref. TASK 25-62-44-000-002) and the lining.

R **ON A/C 003-049, 051-099, 101-149, 151-199, 201-299, 301-399, 401-499,
 Subtask 52-10-00-010-086-A
 C. Removal of the Escape Slide/Raft
 (1) Remove the door lining panels:
 (a) For the FWD passenger/crew doors:
 (Ref. TASK 25-23-46-000-001)

 -
for the left door 831AZ

 -
for the right door 841AZ

 1EFF : ALL 1 52-10-00Page 410 1 1 Aug 01/05 1 1 1CES 1

 (b) For the Aft passenger/crew doors:
 (Ref. TASK 25-23-46-000-002)

 -
for the left door 832AZ

 -
for the right door 842AZ
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門1(83)