A. Aircraft Maintenance Configuration
(1)
Make sure that the access platform is in position at the zone 831 or 841 or 832 or 842.
(2)
Obey the special precautions before you start work on the door (Ref. TASK 52-10-00-860-001).
R 1EFF : 003-049, 051-099, 101-149, 151-199, 1 52-10-00Page 221 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1 Subtask 52-10-00-865-090
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
121VU EIS/SLIDES/ARM AND WARN/FLT 15WN P11 121VU EIS/SLIDES/ARM AND WARN/GND 13WN P10 121VU EIS/SDAC1 AND 2/DOOR/DET/PAX 48WV P05
4. Procedure
_________ Subtask 52-10-00-080-051
A. Removal of the Ballast Weight
(Ref. Fig. 205A/TASK 52-10-00-991-049-A)
(1) Remove the BALLAST WEIGHT - PASSENGER CREW DOOR (98D52103501000) as follows:
(a) Remove the three weight assemblies with the weights N2 as follows:
1 Unscrew the nuts (3) and remove them.
_
2 Remove the pins (6) and the weights N2 (5).
_
(b) Remove the weight assy with the weights N1 as follows: 1 Unscrew the nut (8) and remove it.
_
2 Remove the pin (9), the weights N1 (10) and the pin (11).
_
(c) Remove the base plate with the weight fitting from the door as follows:
1 Remove the pins (4).
_ 2 Lift the base plate (2) with the weight fitting (1) and remove
_
it from the door.
NOTE : Two persons are necessary for this step, one on each
____ side of the base plate (2). The base plate (2) with the weight fitting (1) weighs 23 kg (50.705 lb).
R 1EFF : 003-049, 051-099, 101-149, 151-199, 1 52-10-00Page 222 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1
Passenger/Crew Door Ballast Weight (98D52103501000) for Escape Slide/Raft Figure 205A/TASK 52-10-00-991-049-A
R 1EFF : 003-049, 051-099, 101-149, 151-199, 1 52-10-00Page 223 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1 1EFF : 001-002, 1 52-10-00Page 224 1 1 Feb 01/02 1 1 1CES 1 1EFF : 001-002, 1 52-10-00Page 225 1 1 Feb 01/02 1 1 1CES 1R Base Plate and Weight Fitting - Passenger/Crew Doors R Figure 206/TASK 52-10-00-991-050
R **ON A/C 001-002,
R TASK 52-10-00-480-001
R Installation of the Passenger/Crew Door Ballast Weight (98D52103501000) for
R Escape Slide
R 1. Reason for the Job__________________
R This procedure tells how to install the ballast weight set to 33 kg (72.752
R lb) which is equal to the weight of the escape slide, the door linings and
R the door insulation.
R 2. Job Set-up Information______________________
R A. Fixtures, Tools, Test and Support Equipment
R -------------------------------------------------------------------------------
R REFERENCE QTY DESIGNATION
R -------------------------------------------------------------------------------
R No specific access platform 3.5 m (11 ft. 6 in.)
R 98D52103501000 1 BALLAST WEIGHT - PASSENGER CREW DOOR
R B. Referenced Information
R -------------------------------------------------------------------------------
R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R 52-10-00-860-001 Special Precautions before Work on the Passenger/Crew
R Door
R 52-10-00-991-049 Fig. 205
R 52-10-00-991-050 Fig. 206
R 3. Job Set-up__________
R Subtask 52-10-00-860-055
R A. Aircraft Maintenance Configuration
R (1) Make sure that the access platform is in position at the zone 831 or
R 841 or 832 or 842.
R (2) Obey the special precautions before you start work on the door
R (Ref. TASK 52-10-00-860-001).
R Subtask 52-10-00-865-085
R B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
R tagged
R -------------------------------------------------------------------------------
R PANEL DESIGNATION IDENT. LOCATION
R -------------------------------------------------------------------------------
R 121VU EIS/SLIDES/ARM AND WARN/FLT 15WN P11
R 121VU EIS/SLIDES/ARM AND WARN/GND 13WN P10
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門1(73)
