曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 D. Safety Precautions
 (1) Put the warning notices in the flight compartment to tell persons not to operate the flight controls.
 (2) Put the warning notices in position to tell persons not to operate the hydraulic systems.
 (3) Put the variable access platform in position at zone 330 for the left hand torque box and/or zone 340 for the right hand torque box.
 Subtask 55-10-00-010-051
 E. Access
 (1) Remove the THS leading edge (Ref. TASK 55-12-11-000-001).
 (2) Remove/open the trailing edge access panels (Ref. TASK 55-13-11-000-001).
 (3) Remove the THS tips 332AB, 342AB. (Ref. TASK 55-14-11-000-001)
 4. Procedure_________
 (Ref. Fig. 602/TASK 55-10-00-991-002)
 Subtask 55-10-00-210-052 
R  A. Detailed Inspection 
R R R R  (1) Make a detailed inspection of the horizontal stabilizer internal structure of the torque box outboard of fuselage fairings, thru the lightening holes, for: - deterioration of the structure, - stringer debonding and delamination, - rib shear ties debonding, - spar flanges debonding.

 

R THS Torque Box Internal Structure Outboard Fuselage Fairings Figure 602/TASK 55-10-00-991-002
 1EFF : ALL 1 55-10-00Page 609 1 1 Feb 01/04 1 1 1CES 1R (2) If damage is found, look for allowable damage limits (Ref. SRM 551100 R PB 101).

 5. Close-up
________
 Subtask 55-10-00-410-053
 A. Visual Inspection
 (1) Make sure that the work area is clean and clear of tool(s) and other items.
 Subtask 55-10-00-410-051
 B. Close Access
 (1)
 Install/close the trailing edge access panels. (Ref. TASK 55-13-11-400-001)

 (2)
 Install the THS leading edge (Ref. TASK 55-12-11-400-001).

 (3)
 Install the THS tips 332AB, 342AB. (Ref. TASK 55-14-11-400-001). Subtask 55-10-00-942-051

 C. Remove Ground Equipment
 (1) Remove the warning notice(s).

 (2)
 Remove the access platform(s).
 Subtask 55-10-00-081-051

 

 D. Remove Locking Devices
 (1) Remove the PIN-SIDE STICK LOCKING from the CAPT and F/O side stick controllers.
 Subtask 55-10-00-865-053
 E. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 15CE1, 15CE2, 16CE1, 16CE2, 19CE1, 19CE2, 19CE3 TRIMMABLE HORIZONTAL STABILIZER - REMOVAL/INSTALLATION

______________________________________________________
 TASK 55-10-11-000-001
 Removal of the Trimmable Horizontal Stabilizer
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE. WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROLS ARE CLEAR.
_______ MOVEMENT OF FLIGHT CONTROLS CAN CAUSE INJURY TO PERSONS AND/OR DAMAGE.
 WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROL SURFACES ARE
_______ CLEAR BEFORE YOU PRESSURIZE/DEPRESSURIZE A HYDRAULIC SYSTEM.
 WARNING : WEAR AND ATTACH A SAFETY HARNESS WHEN YOU WORK ON HIGH SECTIONS. A
_______ FALL CAN INJURE OR KILL YOU.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 CAUTION : DO NOT CAUSE DAMAGE TO THE SURFACES. THE COMPONENTS ARE MADE OF
_______ CARBONFIBER REINFORCED PLASTIC.
 1. Reason for the Job__________________ Self Explanatory

 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
 No specific crane
 No specific electrical blanking caps and plugs
 No specific hydraulic blanking caps
 No specific variable access platform
 No specific warning notices
 No specific NSA 9006-12B
 No specific 35D55182822000
 98D27903500000 2 PIN-SIDE STICK LOCKING

R 98D55109005000 2 SLING-THS
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
27-44-51-000-001 Removal of the Trimmable Horizontal Stabilizer (THS)
 Actuator (9CE) 29-10-00-864-001 Depressurize the Green Hydraulic System 29-10-00-864-002 Depressurize the Yellow Hydraulic System 29-10-00-864-003 Depressurize the Blue Hydraulic System 49-11-11-000-001 Removal of the Auxiliary Power Unit (APU) - 4005KM
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM STABILIZERS 安定面(11)