___________________________________
TASK 55-42-13-000-001
Removal of the Access Panel 326CT at the Rudder Attach Fitting No. 7
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific nonmetallic scraper
No specific warning notices
No specific adjustable access platform 10.5 m (34 ft. 5 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
29-00-00-864-001 Put the Related Hydraulic System in the Depressurized Configuration before Maintenance Action 55-42-13-991-001 Fig. 401
R 1EFF : 106-149, 159-199, 211-299, 301-399, 1 55-42-13Page 401 1401-499, 1Aug 01/05 1 1 1CES 1
3. Job Set-up
__________ Subtask 55-42-13-865-050
A. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU AUTO FLT/FAC1/28VDC 5CC1 B04 49VU AUTO FLT/FAC1/26VAC 14CC1 B03 121VU AUTO FLT/RUDDER/TRIM/IND 15CC M20 121VU AUTO FLT/FAC2/28VDC 5CC2 M19 121VU AUTO FLT/FAC2/26VAC 14CC2 M18
Subtask 55-42-13-860-050
B. Aircraft Maintenance Configuration
(1)
Make sure that the hydraulic systems are depressurized and put them in the maintenance configuration. (Ref. TASK 29-00-00-864-001).
(2)
Put the warning notices in position to tell persons not to pressurize the hydraulic systems:
-In the cockpit on the hydraulic section 40VU of the overhead panel,
-On the ground service panels of the hydraulic systems.
(3)
Put the warning notices in position in the cockpit to tell persons not to operate the flight controls.
(4)
Put the adjustable access platform in position at the leading edge of the rudder.
4. Procedure
_________ (Ref. Fig. 401/TASK 55-42-13-991-001) Subtask 55-42-13-020-050
A. Removal of the Access Panel 326CT at the Rudder Attach Fitting No. 7
(1)
Remove the sealants from the joints between the access panel (3) and the rudder leading edge (1) with a nonmetallic scraper.
(2)
Hold the access panel (3) and remove the screws (2).
R 1EFF : 106-149, 159-199, 211-299, 301-399, 1 55-42-13Page 402 1401-499, 1Aug 01/05 1 1 1CES 1
Access Panel 326CT at the Rudder Attach Fitting No. 7
Figure 401/TASK 55-42-13-991-001
R 1EFF : 106-149, 159-199, 211-299, 301-399, 1 55-42-13Page 403 1401-499, 1Aug 01/05 1 1 1CES 1
(3) Remove the access panel (3) from the leading edge of the rudder (1).
R 1EFF : 106-149, 159-199, 211-299, 301-399, 1 55-42-13Page 404 1401-499, 1Aug 01/05 1 1 1CES 1
TASK 55-42-13-400-001
Installation of the Access Panel 326CT at the Rudder Attach Fitting No. 7
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL MATERIALS
_______ ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM STABILIZERS 安定面(111)
