曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 (a) Put the access panel in position and install but do not tighten the studs (6) at this time. 
R R R  (b) Make sure that the clearance "A" between the access panels is 1.0 +3.0 -0.0 mm (0.0393 +0.1181 -0.0000 in.). 
R R  (c) Make sure that the clearance "B" between the access panels and the rudder is 1.0 +3.0 -0.0 mm (0.0393 +0.1181 -0.0000 in.). 
R  (d) Tighten the studs (6). 
R  (e) Tighten the studs (1). 
R  (5) Apply SEALANTS (Material No. 09-016) to the clearance between the access panels.
 WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE_______ SPECIAL MATERIAL. THIS MATERIAL IS DANGEROUS. 
R  (6) Remove unwanted sealant with CLEANING AGENTS (Material No. 11-008).
 5. Close-up________
 Subtask 55-33-13-942-054
 A. Close Access
 (1) Remove the warning notice(s).
 (2) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
 (3) Remove the access platform(s).
 Subtask 55-33-13-865-058
 B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 5CC1, 5CC2, 14CC1, 14CC2, 15CC, 15CE1, 15CE2, 16CE1, 16CE2, 19CE1, 19CE2, 19CE3, 21CE1, 21CE2, 21CE3, 22CE

 

 TRAILING EDGE - VERTICAL STABILIZER - REMOVAL/INSTALLATION
__________________________________________________________
 TASK 55-33-13-000-001
 Removal of the Trailing Edge Access-Panels 325EL, 325ER, 325DL, 325DR, 325CL, 325CR, 325BL and 325BR
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
 START A TASK ON OR NEAR:

 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
 No specific warning notice
 No specific adjustable access platform 11 m (36 ft. 1 in.)

 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
29-00-00-864-001 Put the Related Hydraulic System in the Depressurized
 Configuration before Maintenance Action R 55-33-13-010-002 Opening/Removal of the Trailing Edge Access-Panels R 325EL, 325ER, 325DL, 325DR, 325CL, 325CR, 325BL and R 325BR
 55-33-13-991-001 Fig. 401

 3. Job Set-up__________
 Subtask 55-33-13-865-050
 A. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU FLIGHT CONTROLS/ELAC1/NORM/SPLY 15CE1 B11 49VU FLIGHT CONTROLS/THS/ACTR/MOT2 19CE2 B09 49VU FLIGHT CONTROLS/SEC1/NORM/SPLY 21CE1 B08 49VU AUTO FLT/FAC1/28VDC 5CC1 B04 49VU AUTO FLT/FAC1/26VAC 14CC1 B03 105VU FLIGHT CONTROLS/ELAC2/STBY SPLY 16CE2 A02 105VU FLT CTL/ELAC1/STBY SPLY 16CE1 A01 105VU FLT CTL/SEC1/STBY SPLY 22CE B01 121VU AUTO FLT/RUDDER/TRIM/IND 15CC M20 121VU AUTO FLT/FAC2/28VDC 5CC2 M19 121VU AUTO FLT/FAC2/26VAC 14CC2 M18 121VU FLIGHT CONTROLS/SEC3/SPLY 21CE3 Q19 121VU FLIGHT CONTROLS/SEC2/SPLY 21CE2 Q18 121VU FLIGHT CONTROLS/THS ACTR/MOT3 19CE3 Q17 121VU FLIGHT CONTROLS/THS ACTR/MOT1 19CE1 Q16 121VU FLIGHT CONTROLS/ELAC2/NORM/SPLY 15CE2 R20
 Subtask 55-33-13-864-050
 B. Depressurize the Blue, Green and Yellow aircraft hydraulic systems
 (Ref. TASK 29-00-00-864-001).

 Subtask 55-33-13-010-053
 C. Get Access
 (1)
 Put the warning notice in the cockpit to tell persons not to operate the flight controls.

 (2)
 Put an adjustable access platform in position.

 (3)
 Put the rudder panels in a neutral position.

 1EFF : ALL 1 55-33-13Page 402 1 1 Aug 01/01R 1 1 1CES 1

 4. Procedure
_________

 (Ref. Fig. 401/TASK 55-33-13-991-001)
 Subtask 55-33-13-020-052

 A. Remove the Access Panels
 (1) For access panels 325BL, 325BR, 325CL, 325CR and 325DL: NOTE : The removal procedure for one access panel is given; the
____ procedures for all access panels are almost the same.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM STABILIZERS 安定面(90)